Black Friday deals live now across 14 brands Shop the deals
Snowboard strapped into a Big Days ski and snowboard mount on a Chase Rack above a pickup truck bed

Truck Bed Ski Rack Guide: How to Carry Skis and Snowboards

Skis and snowboards are awkward cargo. They are long, the edges are sharp, and they come back from the mountain wet and covered in road grime. In a pickup you have three places to put them: on the roof, in the cab or in the bed. Each one works, and each one has a cost.

This guide covers how to choose, how to protect your gear on the drive, and how a truck bed ski rack fits into a truck you already use the rest of the year.

Roof, cab or bed: the trade-offs

Roof. A roof ski rack clamps to crossbars and keeps gear out of the way. The catch is that you lift skis overhead, often over a snowy truck, and on a lifted pickup that is a reach. It also adds height for garages and parking structures. If you already run crossbars, a roof rack is the simplest fix, and our ski racks collection has roof options from Swagman and Front Runner.

Cab. It costs nothing and the gear stays secure. The drive home is the problem. Wet skis, boards and boots drip melting snow onto seats and floors, and sharp edges can cut upholstery. A full crew also loses the back seat. Fine for one person on a short trip.

Bed. The bed is the natural spot for long, wet gear. Tossed in loose, though, skis slide around, bases scratch, edges ding against the bed floor and each other, and everything sits in whatever slush collects back there. A rack in the bed fixes that by holding gear off the floor and strapped in place.

How to decide: one or two people and crossbars already on the truck, the roof works. A crew, a lifted truck, or a truck that also hauls bikes or gear, the bed makes more sense.

What to protect, and how

  • Edges and bases. Keep them off metal and off each other. Big Days says its truck bed ski rack holds skis and boards above the bed floor, which prevents the scratched bases and dulled edges you get from gear sliding around loose. Fresh wax stays intact.
  • Bindings. Load pairs so bindings do not grind against each other or the rack, and strap each pair so it cannot shift. A ski strap that holds a pair base to base keeps it together while you load.
  • Road salt and grime. Winter roads are treated, and spray gets on everything. Rinse skis, boards and the rack with fresh water after a trip, then dry the edges so they do not rust.
  • Theft. Gear in an open bed is visible. The Swagman Squall roof racks lock, and the Front Runner Ski / Snowboard Carrier has an anti-theft lock system, per their product pages. The Big Days ski listings do not mention locks, so bring a cable lock or keep gear in sight at stops.

Keep wet gear out of the cab

Plan the trip home before you leave the house.

  1. Knock snow off skis and boards before you load them.
  2. Put wet boots, gloves and shells in a tote or boot bag that rides in the bed, not on the seats.
  3. Keep a dry layer and dry socks in the cab for the drive.

Big Days says the bed under the rack stays open for duffels and sleds, and the rack works with many tonneau covers: T-track covers (adapter sold separately) or covers that leave at least 2 inches of bed rail exposed. Solid one-piece covers do not work. That bed space is where the wet stuff goes.

If you are camping on a ski trip, our winter camping guide covers staying warm overnight.

How the Big Days truck bed ski rack works

The Big Days ski rack is a complete rack: the Chase Rack base, which installs above the truck bed, plus 1, 2 or 3 ski/snowboard mounts. Here is what the product page says:

  • Each mount holds 2 sets of skis or 2 snowboards, with rubber holding straps.
  • Up to 3 mounts per rack, for up to 6 sets of skis or 6 snowboards.
  • Mounts can run above or below the upper crossbar.
  • Nothing sits in the hitch receiver or on the tailgate, so you can still tow and use your backup camera and sensors.
  • It works with tonneau covers, light bars and headache racks.
  • The rack adds lashing points, and Big Days says about 40 cubic feet of open bed space stays free under the rack.
  • Made in Utah.

The Big Days Chase Rack for Skis and Snowboards is sold by how many sets of skis or snowboards you want to carry: 2, 4 or 6, which means 1, 2 or 3 mounts. Not sure about your bed or cover? Order now; we check fit against your vehicle after you order and contact you before it ships if anything doesn't match.

Skis strapped to a Big Days Chase Rack above a pickup truck bed in snowy aspen trees

Full rack or add-on mount

There are two ways in, depending on what is already on your truck.

Already running a Chase Rack? The Ski/Snowboard Mount is the add-on. It comes with 2 ski/snowboard brackets, 2 rubber holding straps and T-track hardware, and it needs the Big Days Chase Rack System, which is sold separately.

Starting with an empty bed? The Chase Rack for Skis and Snowboards ships the base and the mounts together, so it is the one to order.

One rack, four seasons: the Chase Rack swap

If you haul bikes on a Big Days Chase Rack, you do not need a second rack for winter. The Chase Rack Truck Bed Bike Rack uses a modular T-track base, and the same T-track takes Big Days bike, moto and ski mounts. Bikes in summer, skis in winter, same rack.

What the Chase Rack listing says about fit:

  • Fits most mid-size and full-size pickups with 40 to 64 inches of inside bed width.
  • Bed lengths from 4 ft 10 in to 8 ft.
  • 1 to 5 bike mounts per rack.
  • Not compatible with any Ram with RamBox, the 2006 to 2014 Honda Ridgeline, Tesla Cybertruck, Hyundai Santa Cruz, Chevy Avalanche, GMC Hummer EV or the GMC Sierra CarbonPro bed. Big Days says the 2017 and newer Ridgeline and the Rivian R1T don't work with the standard clamp-on setup.
  • The lower crossbar comes off when you need the full bed.

Our truck bed bike rack guide covers the bike side in detail.

How to check fit

  1. Measure inside bed width at the narrowest point and compare it to the 40 to 64 inch range. Check the exclusion list.
  2. Truck model. Big Days lists the ski rack for all model years of mid-size pickups like the Tacoma, Gladiator, Colorado, Canyon, Ranger and Frontier, and full-size trucks like the Silverado, Sierra, RAM, Tundra, Titan and F-150 through F-450.
  3. Drilling. The standard setup clamps to the bed rails. The bolt-on setup, which tonneau cover trucks use, means drilling four 3/8 inch holes in the top of the bed rails. Trucks with Deck Rail need the Deck Rail clamp.
  4. Cab protection. The Big Days Headache Rack Pro is a laser cut aluminum panel that protects the back window. It slides into the Chase Rack upper crossbar with the included T-track hardware, with no drilling, and comes as a MOLLE panel for accessories or a window panel for a clearer view out the back. It needs a Chase Rack, and the base rack is not included.
  5. Count your gear. Two sets of skis or two boards per mount. A family of four with skis needs two mounts.

Quick checklist

  1. Pick roof, cab or bed based on your truck and your crew.
  2. Measure inside bed width and check the exclusions.
  3. Count skis and boards: 2 per mount, up to 6 per rack.
  4. Decide on the full rack, or just the mount if you already run a Chase Rack.
  5. Plan where wet boots and bags ride home.
  6. Rinse salt off gear and the rack after each trip.
  7. Not sure about fit? Send us your truck, bed length and cover before you order.

FAQ

Can I carry skis in a truck bed without a rack?

You can, but loose skis slide, scratch bases, ding edges and sit in slush. If you have to, pad the bed floor, strap pairs together and tie them down so nothing shifts.

Will the Big Days ski rack block my hitch or tailgate?

No. Per Big Days, nothing sits in the hitch receiver or on the tailgate, so towing and your backup camera still work.

How many skis or snowboards does it carry?

Each mount holds 2 sets of skis or 2 snowboards. You can run up to 3 mounts on one rack, for 6 total.

Shop the gear in this guide

Related guides