Rivian Build Guide: R1T Bed Rack, R1S Roof Rack and Camping Setup
A Rivian build usually starts with a roof rack, then, on the R1T, a bed rack, then a cargo-well camping setup. This guide covers the Rivian-fit racks, bumpers and mattresses we carry for the R1T, R1S and R2, plus general camp gear for the trip. Every product below links to its page in our store with the current price. Specs and fit notes come from our product pages and the makers' own pages.
Rivian build at a glance
Fit years are the makers' own.
| Product | Stage | Fits | Shop |
|---|---|---|---|
| Prinsu Pro Rivian R1T Roof Rack | R1T roof rack | R1T, 2022-2027 | View product |
| Front Runner Slimline II Roof Rack Kit for R1T | R1T roof rack | R1T, 2022 and newer | View product |
| Rago EV R1T Roof Rack with Light Pocket | R1T roof rack | R1T, 2022-2025 | View product |
| Rago EV R1T Roof Rack with Solid Fairing | R1T roof rack | R1T, 2022-2025 | View product |
| Front Runner Slimline II Load Bed Rack Kit for R1T | R1T bed rack | R1T load bed, 2022 and newer | View product |
| Prinsu Pro Top Rack for R1T | R1T top rack | R1T, 2022-2027, mounts to a cap or shell, sold separately | View product |
| Rago EV R1T Front Bumper | R1T bumper | R1T, 2022-2024 only | View product |
| Rago EV R1T Rear Bumper | R1T bumper | R1T, 2022-2024 only | View product |
| Prinsu Pro Rivian R1S Roof Rack | R1S roof rack | R1S, 2022-2027 | View product |
| Front Runner Slimline II Roof Rack Kit for R1S | R1S roof rack | R1S, 2022 and newer | View product |
| Luno AIR+FOAM Pro, Rivian R1S | Camping setup | R1S cargo well | View product |
| Luno Fitted Mattress Sheet, Rivian R1S | Camping setup | R1S mattress only | View product |
| Luno AIR+FOAM Pro, Rivian R2 | Camping setup | R2 cargo well | View product |
| Luno Car Privacy Curtain | Camping setup | Most small to full-size vehicles, per Luno | View product |
| Luno Packable Pillow | Camping setup | General camp pillow, Regular or Large | View product |
| Luno Camping String Lights | Camping setup | Cargo area, tent or camp table | View product |
| Dometic CFX5 55IM Electric Cooler | Fridge | Portable, 12/24V DC or 100-240V AC | View product |
| Dometic CFX5 75DZ Electric Cooler | Fridge | Portable, dual zone, 12/24V DC or 100-240V AC | View product |
Fit check
Order now; we check fit against your vehicle after you order and contact you before it ships if anything doesn't match.
Shop the full Rivian collection: gearlanders.com/collections/rivian.
Stage 1: R1T roof rack
The R1T cab roof is short compared with the R1S, so the racks we carry use a roughly 53.5 in deep tray or a compact platform over the cab. Choose Prinsu Pro if you want a low-profile, no-drill aluminum rack with a Standard or light-bar-cutout wind deflector. Choose Front Runner Slimline II if you want a full tray with T-slots and access to Front Runner's 55-plus accessory line. Choose Rago EV if you want a light pocket for a 40 in bar or a solid fairing, with Smooth or Honeycomb side panels.
Prinsu Pro Rivian R1T Roof Rack 2022-2027
Fits 2022-2027 Rivian R1T, per Prinsu
- Powder-coated aluminum, stainless hardware
- Pro crossbars are 44% stronger than earlier Prinsu bars, with 6 drop-in points each
- No-drill, recessed bolt-on mounting feet
- Wind deflector: Standard or light bar cutout
Front Runner Slimline II Roof Rack Kit for Rivian R1T
Fits 2022 and newer Rivian R1T, per Front Runner
- Tray 1,345 x 1,358 mm (53 x 53.5 in)
- 2 R1T foot rails at factory points, no drilling
- Black epoxy powder coated T6 aluminum
- About 62.1 lb installed, part KRRR012T
Rago EV Rivian R1T Roof Rack with Light Pocket 2022-2025
Fits 2022-2025 Rivian R1T, per Rago
- Light pocket for one 40 in bar or up to ten 3 in pods
- 6 aluminum crossmembers, double walled sides
- Adds about 1/4 in of height, per Rago
- Smooth or Honeycomb side panels
Rago EV Rivian R1T Roof Rack with Solid Fairing 2022-2025
Fits 2022-2025 Rivian R1T, per Rago
- Solid front fairing with a rubber edge seal
- 6 aluminum crossmembers, double walled sides
- Adds no more than 1/4 in of height, per Rago
- Smooth or Honeycomb side panels
Prinsu Pro Rivian R1T Roof Rack
Prinsu describes this as a low-profile, powder-coated aluminum platform for a rooftop tent, awning, light bar, boxes and trail gear. The Pro crossbars are 44% stronger than its earlier bars, and each has 6 integrated drop-in points. A two-part side rail with a bend on top adds rigidity, and recessed bolt-on feet keep the profile low. It installs with no drilling and uses stainless steel hardware. Choose the Standard wind deflector or the light bar cutout. Prinsu lists a limited lifetime warranty. It ships by truck freight to the lower 48 states.
Front Runner Slimline II Roof Rack Kit for R1T
Front Runner's R1T roof kit (KRRR012T) is a 1,345 x 1,358 mm Slimline II tray on 2 pickup foot rails that use the factory mounting points, with no drilling. The tray is black epoxy powder coated T6 aluminum with high strength steel fittings. T-slots on the tops and bottoms of the slats take standard 8 mm bolts, and Front Runner lists more than 55 Slimline II accessories for the top, sides and underside. Installed weight is about 28.17 kg (62.1 lb). The kit includes the foot rails, tray, wind deflector, hardware and instructions. It ships by ground parcel to the lower 48 states.
Rago EV R1T Roof Rack with Light Pocket
Rago's R1T rack has a pocketed front fairing that takes one 40 in curved or straight light bar or up to ten 3 in pod lights. Six aluminum crossmembers and double walled side panels carry tents, bikes, boxes and recovery gear, and it mounts to multiple roof install points. Rago says it adds about 1/4 in of height from the highest factory antenna point and works with the factory glass roof and antenna. Choose Smooth or Honeycomb side panels. Rago lists it for the 2022-2025 R1T. It ships by truck freight to the lower 48 states.
Rago EV R1T Roof Rack with Solid Fairing
The same Rago aluminum platform with a solid, aerodynamic front fairing and a rubber edge seal to help cut wind noise. Rago says it adds no more than 1/4 in of height, works with the factory glass roof, and mounts to multiple factory install points. Choose Smooth or Honeycomb side panels. Rago lists it for the 2022-2025 R1T. It ships by truck freight to the lower 48 states.
Stage 2: R1T bed rack
If you want cargo over the bed, not just the cab, the Front Runner Slimline II Load Bed Rack Kit builds a full-size tray above the bed on vehicle-specific legs, so the cab roof can stay clear or carry a shorter rack. The Prinsu Pro Top Rack is another option; it mounts to a cap or shell, sold separately.
Front Runner Slimline II Load Bed Rack Kit for Rivian R1T
Fits 2022 and newer Rivian R1T load bed, per Front Runner
- Same 1,345 x 1,358 mm Slimline II tray as the R1T roof kit
- 6 vehicle-specific legs in 2 tracks, no drilling
- About 85.7 lb installed, part KRRR014T
- 55-plus Slimline II accessories
Prinsu Pro Top Rack for Rivian R1T 2022-2027
Fits 2022-2027 Rivian R1T, per Prinsu; mounts to a cap or shell, sold separately
- Rack Length 4.5' or 5.5'
- Pro crossbars, 44% stronger per Prinsu, 6 drop-in points each
- Feet with +/- 0.5 in height adjustment
- No-drill install, stainless hardware
Front Runner Slimline II Load Bed Rack Kit for R1T
This kit (KRRR014T) puts a 1,345 x 1,358 mm (53 x 53.5 in) Slimline II tray above the 2022 and newer R1T bed. The tray sits on 6 vehicle-specific legs that fit into 2 tracks, with no drilling. Materials match the roof kit: black epoxy powder coated T6 aluminum and high strength steel, with 8 mm T-slots and more than 55 Slimline II accessories. Installed weight is about 38.89 kg (85.7 lb). The box includes the R1T load-bed mounting system, the tray, hardware and instructions. Front Runner covers it under the manufacturer warranty. It ships by ground parcel to the lower 48 states.
Prinsu Pro Top Rack for R1T
Prinsu's Top Rack is a modular, low-profile platform that mounts to a cap or shell, sold separately. Prinsu's photos show it on a truck cap. It uses the Pro crossbar, which Prinsu says is 44% stronger, with 6 drop-in points per bar, and the feet bolt to the crossbars with +/- 0.5 in of height adjustment. Choose Rack Length 4.5' or 5.5'. Prinsu lists it for the 2022-2027 R1T. It is built to order and ships by truck freight to the lower 48 states.
R1T bumpers
For trail armor on a 2022-2024 R1T, Rago EV makes a matching steel front and rear bumper set. Rago does not list 2025 or newer R1T for either bumper, so check your model year first.
Rago EV Rivian R1T Front Bumper 2022-2024
Fits 2022-2024 Rivian R1T only, per Rago
- Steel bumper, 3/16 in aluminum skid plate
- Mount for one 20 in LED light bar
- Keeps factory drive assist sensors, per Rago
- Extensive trimming; pro install recommended
Rago EV Rivian R1T Rear Bumper 2022-2024
Fits 2022-2024 Rivian R1T only, per Rago
- Steel bumper with two 3/16 in skid plates
- Two 3 in pod light mounts
- Keeps factory drive assist sensors, per Rago
- Pro install recommended
Rago EV R1T Front Bumper
A low-profile steel front bumper with an integrated 3/16 in aluminum skid plate and a center mount for one 20 in LED light bar. Rago says it works with the factory drive assist sensors, adaptive cruise, automatic high beams and fog lights. Rago notes extensive trimming is required and highly recommends professional installation. It ships by truck freight to the lower 48 states.
Rago EV R1T Rear Bumper
A wraparound steel rear bumper with two 3/16 in skid plates and two 3 in pod light mounts. Rago says it retains the factory drive assist sensors and highly recommends professional installation. It ships by truck freight to the lower 48 states.
Stage 3: R1S roof rack
The R1S roof is longer, so the Front Runner tray for this SUV is 85.3 in long, versus 53.5 in on the R1T. Prinsu Pro is again the low-profile, factory-bolt-on option, with an integrated 40 in light bar mount and published load ratings on our product page.
Prinsu Pro Rivian R1S Roof Rack
Fits 2022-2027 Rivian R1S, per Prinsu
- Bolts to factory mounting points, no drilling
- 800 lb dynamic and 1,200 lb static, per Prinsu
- Integrated 40 in light bar mount
- Standard or light bar cutout wind deflector
Front Runner Slimline II Roof Rack Kit for Rivian R1S
Fits 2022 and newer Rivian R1S, per Front Runner
- Full-size tray, 1,345 x 2,166 mm (53 x 85.3 in)
- 2 foot rails at factory points, no drilling
- T6 aluminum tray, 8 mm T-slots
- 55-plus Slimline II accessories, part KRRR013T
Prinsu Pro Rivian R1S Roof Rack
Prinsu calls this the Pro EV Series roof rack: an all-aluminum, low-profile platform for tents, boxes, boards and recovery gear. It bolts to the factory Rivian mounting points with no drilling. Extruded Pro crossbars are 44% stronger, per Prinsu, with 6 drop points each. Our product page lists 800 lb dynamic and 1,200 lb static capacity, plus an integrated 40 in light bar mount. Choose Standard (400-002-033-001) or Light Bar Cutout (400-002-033-002). Check your vehicle's roof load rating before loading the rack. Prinsu lists a limited lifetime warranty against manufacturing defects and structural issues. It ships by truck freight to the lower 48 states.
Front Runner Slimline II Roof Rack Kit for R1S
The R1S kit (KRRR013T) uses a longer Slimline II tray, 1,345 x 2,166 mm (53 x 85.3 in), on 2 SUV foot rails at the factory points, with no drilling. The tray is the same black epoxy powder coated T6 aluminum construction, with 8 mm T-slots and more than 55 Slimline II accessories. The kit includes the foot rails, tray, wind deflector, hardware and instructions. It ships by ground parcel to the lower 48 states.
Stage 4: Rivian camping setup (R1S and R2)
We carry Luno AIR+FOAM Pro mattresses cut for the R1S cargo well and for the R2 cargo well. They are different shapes. The R1S mattress does not fill an R2, and the R2 mattress does not fill an R1S. The fitted sheet we carry is for the R1S mattress only. We do not currently list a Luno mattress cut for the R1T.
Rivian R1S Air Mattress, Luno AIR+FOAM Pro
Cut for the Rivian R1S cargo well
- Polyurethane foam inside the air chambers
- Self-inflates to about 60% in 3 to 5 minutes, then finish with the AirRoll Bag
- No pump to charge
- Luno rates it R-value 11, a 4-season pad
Luno Fitted Mattress Sheet, Rivian R1S
Fits the Luno R1S mattress only
- Polyester-spandex sheet with stay-put corners
- Valve cut-outs so you can add or release air with the sheet on
- Does not fit the R2 mattress or the S2, P2, S3 or P3 sizes
- Packs in a 10 x 6 in pouch and is machine washable
Rivian R2 Air Mattress, Luno AIR+FOAM Pro
Cut for the Rivian R2 cargo well
- Dedicated R2 shape, not the R1S cut or a generic full-size SUV mattress
- Same AIR+FOAM Pro construction as the R1S mattress
- Self-inflates to about 60% in 3 to 5 minutes
- Luno rates it R-value 11
Luno AIR+FOAM Pro, Rivian R1S
This mattress is cut for the R1S cargo well, so it is a different shape from Luno's Full-Size SUV mattress and from the Rivian R2 mattress. AIR+FOAM Pro puts polyurethane foam inside the air chambers. It self-inflates to about 60% in 3 to 5 minutes, and you finish with the included AirRoll Bag, so there is no pump to charge. Luno rates it R-value 11, which our product page describes as a 4-season pad for cold nights.
Luno Fitted Mattress Sheet, Rivian R1S
This is the cover for the Luno AIR+FOAM Pro Rivian R1S mattress. It is a soft, breathable polyester-spandex sheet with valve cut-outs and stay-put corners. Luno lists this sheet for the R1S mattress only. It does not fit the Rivian R2 mattress, the S2 / P2 Full-Size SUV mattress, or the 4Runner / Defender S3 / P3 mattress. It packs into a 10 x 6 in pouch and is machine washable.
Luno AIR+FOAM Pro, Rivian R2
The R2 mattress is cut for the R2 cargo well. Construction matches the R1S AIR+FOAM Pro: foam in the air chambers, self-inflation to about 60% in 3 to 5 minutes, AirRoll Bag, and Luno's R-value 11 rating. We do not currently list an R2 fitted sheet.
Stage 5: General camp gear for a Rivian trip
These items are not vehicle-specific, but they are the camp pieces we already sell that clearly belong with a cargo-well mattress or a road-trip fridge. Luno lists the privacy curtain for most small to full-size vehicles.
Luno Car Privacy Curtain
The curtain hangs behind the front seats and splits the cabin from the sleeping area. A magnetic center seal closes the gap, and Easy Ties hold the panels open while you drive. It is 51 x 26 in sun-blocking hexagonal ripstop and rolls up to 14 x 3 x 3 in. Luno notes that the curtain does not cover the glass, so pair it with window screens if you want that coverage.
Luno Packable Pillow, Large
A shredded memory foam pillow with an internal zipper so you can add or remove foam. The removable cover has two faces: a polyester-spandex blend for cold nights and a moisture-wicking polyester jersey knit for warm ones. The cover is machine washable. Available in Large; the Regular is currently unavailable. The Large lays flat at 24 x 13 x 6 in.
Luno Camping String Lights
Twenty feet of warm white LEDs for the cargo area, a tent or the camp table. They run from the included USB-C battery pack. Luno says to power them only from that pack. A three-button control sets low, medium or high brightness and steady, twinkle or breathing modes. Luno rates the 550 mA pack for up to 8 hours. Suction cups hold the line on glass, and the pouch can work as a lantern.
Dometic CFX5 55IM Electric Cooler
A 55L portable fridge freezer with a built-in ice maker. It holds up to 84 12 oz cans, cools from -7F to 68F, and runs on 12/24V DC or 100 to 240V AC. It is a portable cooler, not a Rivian-specific install, so it can ride in the R1T bed, the Gear Tunnel, or the R1S cargo area as space allows. Confirm the cooler dimensions against your chosen space before you buy.
Dometic CFX5 75DZ Electric Cooler
A 75L dual-zone portable fridge freezer, so you can carry refrigerated and frozen food at the same time. It holds up to 113 12 oz cans, with the same -7F to 68F range and 12/24V DC or 100 to 240V AC power as the 55IM. It is larger, so measure the bed, cargo well or tunnel before you choose this size.
About the Gear Tunnel
The R1T Gear Tunnel is a lockable, pass-through bay in the bed. It is a natural place for a compact fridge, recovery kit or camp bags. We do not currently list a Gear Tunnel-specific drawer, organizer or sliding tray. If you are shopping for a tunnel-fit product, see the notes below on items we do not carry yet.
How to plan a Rivian build
- Pick the roof rack first, and check your vehicle's roof load rating before you add a tent or a heavy box.
- On the R1T, decide whether you want cargo over the cab, over the bed, or both. The Front Runner load-bed kit, the Prinsu Pro Top Rack and the Front Runner, Prinsu or Rago cab racks are separate products.
- For camping in the R1S, start with the dedicated Luno R1S mattress and its fitted sheet, then add the curtain, pillow and lights if you want a complete sleep setup.
- For the R2, we carry the dedicated Luno R2 mattress only. There is no R2 fitted sheet or R2 rack in our shop today.
- A portable Dometic CFX5 fridge can travel with any of these vehicles. Measure the space, including the Gear Tunnel on an R1T, before you pick 55L or 75L.
Not in our shop yet
These Rivian-fit products are made by brands we carry, but they are not in our shop today, so there are no product links here yet.
- Rago EV R1T chase rack, bed-cab molle panels and roof-rack decking. We now carry the Rago EV R1T roof racks and the 2022-2024 front and rear bumpers above.
- Luno AIR+FOAM Pro sleep kits and cozy bedding kits in the R1S size. We already sell the R1S mattress and sheet, plus a packable pillow, separately.
- We have not found a Gear Tunnel-specific organizer to carry yet, and Luno does not currently list an R1T mattress.
Rivian build FAQ
What is the best Rivian R1T bed rack you carry?
The Front Runner Slimline II Load Bed Rack Kit for the 2022 and newer R1T puts a 53 x 53.5 in Slimline II tray above the bed on 6 legs and 2 tracks, with no drilling. The Prinsu Pro Top Rack (Rack Length 4.5' or 5.5') is another option; it mounts to a cap or shell, sold separately. See each product page for current pricing.
Which Rivian R1S roof rack should I get?
Both racks we carry fit the R1S from 2022 (Prinsu lists 2022 to 2027, Front Runner lists 2022 and newer) and install at the factory points with no drilling. The Prinsu Pro is a low-profile aluminum rack with an integrated 40 in light bar mount and 800 lb dynamic / 1,200 lb static ratings, per Prinsu. The Front Runner Slimline II kit is a longer 85.3 in tray with T-slots and more than 55 Slimline II accessories. See each product page for current pricing.
Do you have a Rivian camping mattress?
Yes, for the R1S and the R2. The Luno AIR+FOAM Pro R1S mattress is cut for the R1S cargo well, and a matching fitted sheet is sold separately. The Luno AIR+FOAM Pro R2 mattress is a different cut for the R2. We do not currently list an R1T mattress. See each product page for current pricing.
Do you sell Gear Tunnel organizers?
Not yet. We do not currently list a tunnel-specific drawer or organizer. A portable fridge or soft bags can still ride in the tunnel if they fit the opening and the length.
Will a generic SUV mattress fit my R1S or R2?
Our R1S and R2 product pages say these Luno mattresses are different shapes from the Full-Size SUV mattress. If you want a Luno mattress that fills the cargo well without gaps, use the dedicated R1S or R2 cut.
Sources
Specs checked on our product pages and the makers' sites on November 17, 2026.
- Prinsu Pro Rivian R1T Roof Rack (400-002-033-003 / 400-002-033-004)
- Prinsu Pro Rivian R1S Roof Rack (400-002-033-001 / 400-002-033-002)
- Front Runner Slimline II Roof Rack Kit for Rivian R1T (KRRR012T)
- Front Runner Slimline II Roof Rack Kit for Rivian R1S (KRRR013T)
- Front Runner Slimline II Load Bed Rack Kit for Rivian R1T (KRRR014T)
- Luno AIR+FOAM Pro Rivian R1S mattress (HYB-005-R1)
- Luno Fitted Mattress Sheet, Rivian R1S (RSH-001-R1)
- Luno AIR+FOAM Pro Rivian R2 mattress (RIV1-HYB-006-R1)
- Luno Car Privacy Curtain (PRC-001-R2)
- Luno Packable Pillow (PIL-001-R2 / PIL-002-R2)
- Luno Camping String Lights (STR-001-R2)
- Dometic CFX5 55IM (97000050756) and CFX5 75DZ (97000050757)
- Prinsu Pro Top Rack for Rivian R1T (400-002-027-018 / 400-002-027-019), prinsu.com
- Rago EV R1T Roof Rack with Light Pocket (AC940890103 / AC940650103) and Solid Fairing (AC940850103 / AC940640103), ragoev.com
- Rago EV R1T Front Bumper (F940423070103) and Rear Bumper (R9402312801NA), ragoev.com, listed for 2022-2024 R1T