Big Days Chase Rack Elite | 2 Bike + 2 Moto Truck Bed Rack
Description
The Big Days Chase Rack Elite is a truck bed rack built to carry 2 dirt bikes and 2 mountain bikes at once, upright in the bed with the tailgate closed. It is a complete Elite build on the Big Days Chase Rack System, with a Headache Rack Pro, moto ramp and bike mounts included.
The hitch stays free for towing, and about 40 cubic feet of bed space stays open under the rack. Made in Utah.
Why it works
- Carries 2 motos and 2 bikes at once with the tailgate closed
- Headache Rack Pro included
- Moto ramp and ramp storage brackets included
- Drop brackets and lower bar included
- Hitch stays clear; backup camera and sensors stay usable
- About 40 cubic feet of open bed space, roughly twenty 5-gallon buckets
- Modular T-track system also takes Big Days ski and light bar mounts
Fit
Fits (all model years, per Big Days): Chevrolet Silverado 1500, 2500 and 3500; GMC Sierra 1500, 2500 and 3500; RAM 1500, 2500 and 3500; Toyota Tundra, Tacoma and T100; Nissan Titan and Frontier; Ford F-150, F-250, F-350 and F-450; Jeep Gladiator; Chevrolet Colorado; Ford Ranger; GMC Canyon; Toyota Hilux.
Not compatible: any RAM with RamBox, the 2006 to 2014 Honda Ridgeline, Tesla Cybertruck, Hyundai Santa Cruz, Chevy Avalanche, GMC Hummer EV, and GMC Sierra with the CarbonPro bed. The 2017+ Honda Ridgeline and the Rivian R1T don't work with the standard clamp-on setup, per Big Days.
Bed and load size: 40 to 64 in inside bed width, 4 ft 10 in to 8 ft bed length, motos 125 to 850cc, per Big Days. Trucks with Deck Rail need the Deck Rail clamp. Bolt-on mounting means drilling four 3/8 in holes in the top of the bed rails.
Bikes: bike mounts fit 20 to 29 in wheels.
Offset adapters: not included in this build. For 2 dirt bikes in a bed under 5'5", Big Days recommends 2 offset adapters, which is one Moto Offset Kit. Beds over 5'5" usually need none, per Big Days.
Tonneau covers: works with T-track tonneau covers (adapter sold separately) or covers that leave at least 2 in of bed rail exposed. Folding and retractable covers work well, tri-fold covers can't fold all the way, and solid one-piece covers do not work. Tonneau setups use the bolt-on mount and skip the lower crossbar, per Big Days.
Order now; we check fit against your vehicle after you order and contact you before it ships if anything doesn't match.
Specs
- Bed width: 40 to 64 in inside, adjustable T-track base
- Bed length: 4 ft 10 in to 8 ft
- Rack capacity: up to 900 lb, per Big Days
- Upper crossbar: 61 in (can be trimmed on request); lower crossbar: 52 in
- Risers: 3/16 in A36 steel; crossbars: 6560 T6 alloy; mounts: 1/4 in 5052 alloy
- Rack weight: 70 lb
- Height with no mounts: 20 in; with bikes or motos loaded: about 42 in
- Assembly: about 1 hour, beginner level
- Made in Utah
- Moto sizes: 125 to 850cc
- Bike wheels: 20 to 29 in
- Mounts in this build: 2 motorcycle, 2 bike
In the box
- Risers (rack supports), upper crossbar, lower crossbar and drop brackets
- Pre-installed handles and badges
- Complete hardware kit, bar end caps and a 4 mm Allen wrench
- Mounting hardware for your truck: standard bed clamp, Toyota/Nissan Deck Rail clamp, or bolt-on (drilling required)
- QR code link to instruction videos
Included in the Elite 2 Moto 2 Bike build, per Big Days: Chase Rack base with Stealth Grey handles and badges, Headache Rack Pro, 2 motorcycle mounts, 4 tie-down points, 2 bike mounts, drop brackets and lower bar, motorcycle ramp and ramp storage brackets.
Warranty
Big Days covers the rack base with a limited lifetime warranty against manufacturer defects, and the mounts and accessories in this build for 3 years against manufacturer defects. Paint and finish defects are covered for 1 year. The warranty is for the original retail buyer and does not transfer.
Shipping and returns
Built to order in Utah. Plan on 5 to 10 business days to build, then 3 to 5 days in transit.
Ships by ground as a large parcel to the lower 48 states.
Gearlanders is an authorized Big Days dealer.
Big Days rack questions
Bed clamp or bolt-on: which mounting is right for my truck?
Bed clamp (no drilling): the rack clamps directly to your truck's bed rails with a mounting kit matched to your truck. If your bed rails have a factory track with tie-down points, common on Toyota trucks, the clamp uses the Deck Rail kit instead, also with no drilling.
Bolt-on (permanent, drilling required): the rack bolts directly to your bed rails for a permanent install. You drill four 3/8 in holes into the top of your bed side rails, so you need a power drill and a 3/8 in bit.
Confirm your truck and mounting type (bed clamp, tonneau, or bolt-on) before we place your order.