Big Days Chase Rack Baja 1000 Pro | 3 Moto Truck Bed Rack
Description
The Big Days Chase Rack Baja 1000 Pro is a 3 moto truck bed rack built for long desert runs and race support. It carries three dirt bikes upright with the tailgate closed, and the Pro build adds a headache rack mount, a moto offset kit, a ramp and a Code4LED light bar.
The hitch stays free for towing, and the bed stays open under the rack. Made in Utah on the Big Days Chase Rack System.
Why it works
- Carries 3 dirt bikes or motorcycles with the tailgate closed
- Moto Offset Kit included for spacing three bikes
- Motorcycle ramp and ramp storage mounts included
- Light bar mounts and a 50 in Code4LED light bar included (38 in on the Ford Maverick)
- Headache rack mount included
- Six tie-down points
- Hitch stays clear; camera and sensors stay usable
Fit
Fits (all model years, per Big Days): Chevrolet Silverado 1500, 2500 and 3500; GMC Sierra 1500, 2500 and 3500; RAM 1500, 2500 and 3500; Toyota Tundra, Tacoma and T100; Nissan Titan and Frontier; Ford F-150, F-250, F-350 and F-450; Jeep Gladiator; Chevrolet Colorado; Ford Ranger; GMC Canyon; Toyota Hilux.
Not compatible: any RAM with RamBox, the 2006 to 2014 Honda Ridgeline, Tesla Cybertruck, Hyundai Santa Cruz, Chevy Avalanche, GMC Hummer EV, and GMC Sierra with the CarbonPro bed. The 2017+ Honda Ridgeline and the Rivian R1T don't work with the standard clamp-on setup, per Big Days.
Bed and load size: 40 to 64 in inside bed width, 4 ft 10 in to 8 ft bed length, motos 125 to 850cc, per Big Days. Trucks with Deck Rail need the Deck Rail clamp. Bolt-on mounting means drilling four 3/8 in holes in the top of the bed rails.
Three bikes: the included Moto Offset Kit (2 adapters) staggers the mounts. Per Big Days, 3 bikes take 2 adapters in beds over 5'5" and 3 in beds under 5'5", so a bed under 5'5" needs one more adapter. In beds under 5 ft, the rear tire may need to shift toward the center for the tailgate to close.
Tonneau covers: works with T-track tonneau covers (adapter sold separately) or covers that leave at least 2 in of bed rail exposed. Folding and retractable covers work well, tri-fold covers can't fold all the way, and solid one-piece covers do not work. Tonneau setups use the bolt-on mount and skip the lower crossbar, per Big Days.
Order now; we check fit against your vehicle after you order and contact you before it ships if anything doesn't match.
Hauling three bikes? Our truck bed dirt bike rack guide covers the Moto Offset rule for short beds and compares the Chase Rack with other bed-mounted systems.
Specs
- Bed width: 40 to 64 in inside, adjustable T-track base
- Bed length: 4 ft 10 in to 8 ft
- Rack capacity: up to 900 lb static, per Big Days
- Upper crossbar: 61 in (can be trimmed on request); lower crossbar: 52 in
- Risers: 3/16 in A36 steel; crossbars: 6560 T6 alloy; mounts: 1/4 in 5052 alloy
- Rack weight: 70 lb
- Height with no mounts: 20 in; with bikes or motos loaded: about 42 in
- Assembly: about 1 hour, beginner level
- Made in Utah
- Moto sizes: 125 to 850cc
- Mounts in this build: 3 motorcycle
- Light bar: Code4LED, 50 in (38 in on the Ford Maverick); wiring harness sold separately
In the box
- Risers (rack supports), upper crossbar, lower crossbar and drop brackets
- Pre-installed handles and badges
- Complete hardware kit, bar end caps and a 4 mm Allen wrench
- Mounting hardware for your truck: standard bed clamp, Toyota/Nissan Deck Rail clamp, or bolt-on (drilling required)
- QR code link to instruction videos
Included in the Pro Build 3 Moto, per Big Days: Chase Rack base with Stealth Grey handles and badges, headache rack mount, 3 motorcycle mounts, 6 tie-down points, Moto Offset Kit (2 adapters), motorcycle ramp and ramp storage mounts, light bar mounts and a Code4LED light bar, 50 in (38 in on the Ford Maverick). The light bar wiring harness is sold separately.
Per moto mount: complete moto mount, 2 tie-down points, T-track hardware and instruction manual.
Warranty
Big Days covers the rack base with a limited lifetime warranty against manufacturer defects, and the mounts and accessories in this build for 3 years against manufacturer defects. Paint and finish defects are covered for 1 year. The warranty is for the original retail buyer and does not transfer.
Shipping and returns
Built to order in Utah. Plan on 5 to 10 business days to build, then 3 to 5 days in transit.
Ships by ground as a large parcel to the lower 48 states.
Gearlanders is an authorized Big Days dealer.
Big Days rack questions
Bed clamp or bolt-on: which mounting is right for my truck?
Bed clamp (no drilling): the rack clamps directly to your truck's bed rails with a mounting kit matched to your truck. If your bed rails have a factory track with tie-down points, common on Toyota trucks, the clamp uses the Deck Rail kit instead, also with no drilling.
Bolt-on (permanent, drilling required): the rack bolts directly to your bed rails for a permanent install. You drill four 3/8 in holes into the top of your bed side rails, so you need a power drill and a 3/8 in bit.
Confirm your truck and mounting type (bed clamp, tonneau, or bolt-on) before we place your order.