Starlink Mini Chevy and GMC third brake light mount
Starlink Mini on a Chevy Silverado roof at the third brake light
Chevy GMC Starlink Mini mount bracket
Chevy GMC mount on the cab roof, rear view
Starlink Mini dish on the third brake light mount

Starlink Mini Chevy and GMC Third Brake Light Mount

$169.95
Metal Mount No Metal Mount
Shipping calculated at checkout Shipping, returns and fit

Fit: Fits Silverado and Sierra 1500 2019-2026 and 2500/3500 2020-2026, Crew Cab and Double Cab. Bolts at the third brake light, no drilling.

Shipping: The rate for this item is calculated at checkout from your address. It is not part of the $199 free shipping offer. Rugged Radios gear ships by UPS at the carrier's rate. Any cart with a Rugged Radios item in it pays UPS rates for the whole order.

Returns: 30 days on new items in the original packaging. If the item arrived damaged or defective, we sent the wrong item, or our page listed your vehicle and it does not fit, we cover the return shipping and there is no restocking fee. Any other return ships back at your cost with a restocking fee of 5% of product cost.

Why buy from us: No-drill Starlink Mini mount at the third brake light of Chevy and GMC trucks. Ships by ground parcel. 30-day returns on unused items.

Shipping policyReturn policy

Secure checkout Amazon American Express Apple Pay Google Pay Mastercard PayPalShop Pay Visa
Description

This Starlink Mini mount, made by Savage UTV and sold by Rugged Radios, fits between the rear wing and third brake light of your Chevy Silverado or GMC Sierra with no cutting or drilling. The mount stays in place and the dish comes off for storage or portable use.

Use the plastic kickstand that came with your Mini, which sits the dish flat, or choose the locking metal mount upgrade, which needs the included anti-theft tool to release the dish and tilts it at a slight aerodynamic angle.

Install takes up to 2 hours. The rear section of the headliner must be loosened to reach the third brake light bolts. A guide, tool list and video link are included.

Why it works

  • Bolts to factory locations, no drilling
  • Powder coated aluminum, stainless hardware
  • (2) magnetic rubber feet for vibration and high wind
  • (2) pre-drilled holes for an antenna or accessory
  • 10 ft 12V DC power cable to the driver side C-pillar floor area
  • Optional locking metal mount

Fit

Fits: Chevy Silverado and GMC Sierra 1500 2019-2026 (new body style), and Silverado and Sierra 2500 and 3500 2020-2026, Crew Cab and Double Cab, per Rugged Radios.

Power: the cable reaches the floorboard. You choose the final power source and any on/off switch.

Needed: your Starlink Mini dish and its equipment, sold separately.

Note: Starlink does not endorse Rugged Radios, Savage UTV or this mount.

Order now; we check fit against your vehicle after you order and contact you before it ships if anything doesn't match.

Specs

  • Material: powder coated aluminum, stainless steel hardware
  • Install time: up to 2 hours
  • Power cable: 10 ft 12V DC
  • Part numbers: 70-CG, 70-CG-MM with metal mount

In the box

  • (1) mount with (2) magnetic rubber feet
  • (1) 10 ft 12V DC power cable
  • (1) installation instructions
  • (1) trim removal tool
  • Locking metal mount and tool if you choose that option

Warranty

Rugged Radios sells this item, and its page does not spell out the warranty terms.

Shipping and returns

Ships by ground parcel to the lower 48 states. Shipping is calculated at checkout.

Shipping policy | Refund policy

Shop more mounts

Questions

Which Chevy and GMC trucks does this Starlink Mini mount work with?
Rugged Radios lists the 2019 to 2026 Chevy Silverado and GMC Sierra 1500 in the new body style, and the 2020 to 2026 Silverado and Sierra 2500 and 3500, in Crew Cab and Double Cab. The mount sits between the rear wing and the third brake light and bolts to factory locations.
Do I have to drill my truck to mount it?
No. Rugged Radios says there is no cutting or drilling, since the mount bolts onto factory locations without modifying the truck body. Installation typically takes up to 2 hours, and the rear section of the headliner must be loosened to reach the third brake light bolts.
What is the difference between the kickstand and metal locking options?
With the standard option you secure the dish with the plastic kickstand that came with your Mini, and it sits completely flat, per Rugged Radios. The metal locking mount upgrade adds security, needs the included anti theft tool to release the dish, and tilts the dish at a slight aerodynamic angle.
How does the Starlink Mini get power in the cab?
Rugged Radios includes a 10 ft 12V DC cable that runs from the dish to the floor area at the driver side C pillar. You choose the final power source, whether ACC, IGN, 110 AC or a portable power bank, and whether to add an on/off switch.
Does the mount stay stable at highway speed?
Rugged Radios says two small magnets with rubber feet reduce road vibration and keep the mount stable in extreme high winds. The mount is powder coated aluminum with stainless steel hardware, has two pre-drilled holes on top for an antenna or other accessories, and the Starlink dish is sold separately.

Recently Viewed

Copyright © Gearlanders 2026