Leitner ACS ROOF Platform Rack for Ford Transit 148 High and Mid Roof 2015+
Description
The Leitner Designs ACS ROOF Platform Rack is a low-profile, no-drill roof rack engineered for the Ford Transit 148 in high roof and mid roof, 2015 and newer. It bolts on with no permanent modification and adds just 4 inches to the height of your van. Choose your roof height below.
Leitner lists it for the Transit 148 high and mid roof both with and without a factory rail system. The load bars slide into toothed channels, so you can move them or add more bars later, and T-track accessories from Thule, Rhino-Rack and Yakima work with it. A wind noise reducer is included, and the rack is ready for Leitner's GearPOD ROOF side-opening, water-resistant locking storage box, sold separately.
Why it works
- No-drill, bolt-on install with no permanent modification
- Fits the Transit 148 high and mid roof, with or without factory rails
- Adds just 4 inches of height
- Adjustable load bars in toothed channels, with room to add more
- Works with Thule, Rhino-Rack and Yakima T-track accessories
- Rated 1,000 lb static, 600 lb on-road and 300 lb off-road
Application
Fits: Ford Transit 148 wheelbase, high roof or mid roof, 2015 and newer, per Leitner Designs. Pick the roof height that matches your van.
Install: The van stands over 9 feet tall, so Leitner recommends a professional install shop with tall ladders. Its guide calls for sealing each mounting bolt with silicone or RV lap sealant.
Order now; we check fit against your vehicle after you order and contact you before it ships if anything doesn't match.
What's in the box
- Front and back bars, side bars and end caps
- Load bars with clamp plates
- Front and rear mounting brackets for the Transit roof
- Wind deflector
- Mounting hardware: T-nuts, bolts and lock nuts
Contents are taken from Leitner's install guide for this rack.
Specs
- Part number: 00-FT148HRA-1907 (high roof), 00-FT148MRA-1906 (mid roof)
- Weight: 100 lb
- Overall height: 4 in
- Material: aluminum alloy
- Fasteners: Grade 10.9 black zinc-nickel coated
- Wall thickness: heavy duty 1.5 mm to 3.0 mm multi-wall aluminum
- Wind noise reducer: included
- Finish: zinc plated and powder coated steel brackets
- Load capacity: 1,000 lb static, 600 lb on-road, 300 lb off-road (always check your vehicle maker's roof load rating)
- Designed, engineered and made in the USA
Photos may show gear and accessories that are sold separately.
Warranty
Leitner Designs covers this part for two years from the date of purchase. Damage from high speed off-road driving or abuse is not covered.
Shipping and returns
Ships by UPS Ground to the lower 48 states, with a flat freight charge shown at checkout.
Shipping policy | Refund policy
California residents: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov