DV8 Toyota 4Runner Roof Rack Light Cutout Fairing 2025-2026
$289.99
Description
The DV8 Roof Rack Light Cutout Fairing is made only for the DV8 2025-2026 4Runner Roof Rack. The cutout keeps your lights low and tight to the roofline, which cuts drag and wind noise.
Ten slots give you options: a 40 inch straight light bar (42 inches mount to mount), two 20 inch single-row bars with the included brackets, or up to ten 3 inch pods. It bolts on and is finished in micro-texture black powder coat.
Key Features
- Made only for the DV8 4Runner roof rack (RRTF3-02)
- Cutout keeps lights low to cut wind noise
- 10 mounting slots
- Fits a 40 inch straight light bar (42 inch mount to mount)
- Brackets included for two 20 inch single-row bars
- Holds up to ten 3 inch pods
- Micro-texture black powder coat
- Bolt-on install
Application / Vehicle Fitment
- Fits the DV8 Spec Series roof rack (RRTF3-02) on 2025-2026 Toyota 4Runner
- Does not fit other brands of roof rack
- Lights are not included
Specifications
- Material: 3 mm and 5 mm steel plate
- Finish: micro-texture black powder coat
- Install: about 1.5 hours on an installed rack, or about 30 minutes extra during a rack install (DV8)
- Shipping weight: about 9 lb
- DV8 part: RRTF3-02L
Shipping and Returns
- Ships from the maker by ground parcel. Shipping is calculated at checkout from your address.
- Free shipping on $199+ does not apply to this item.
FAQs
- Will it fit my Prinsu or Front Runner rack? No. DV8 lists it for the DV8 4Runner roof rack only.
- Are lights included? No. Lights are sold separately.
- How is it shipped? It ships from the maker by ground parcel. Shipping is calculated at checkout from your address.
Questions
Which roof rack does this light fairing need?
Only the DV8 Spec Series roof rack for the 6th Gen 4Runner, part RRTF3-02. DV8 says it will not fit other racks. Order now; we check fit against your vehicle after you order and contact you before it ships if anything doesn't match.
What light setups fit the ten slots?
A 40 inch straight light bar at 42 inches mount to mount, two 20 inch single row bars on the included brackets, or up to ten 3 inch pods, per DV8. Lights are not included.
Is it quicker to add the fairing while the rack is going on?
Yes. DV8 estimates about 30 extra minutes if you add it during the rack install, or about 1.5 hours on a rack that is already mounted.
How does the light plate attach in the DV8 manual?
You mount the front lip from the rack kit to the light bar fascia plate with M6 hardware, bolt the light plate on from the back with M8 hardware, a #6 Allen and a 13 mm socket, and set it between the side rails at the front of the rack.
What is the light cutout fairing made of?
3 mm and 5 mm steel plate in a micro texture black powder coat, per DV8.