DV8 4Runner Spec Series Roof Rack 2025-2026 image 6
DV8 4Runner Spec Series Roof Rack 2025-2026 image 2
DV8 4Runner Spec Series Roof Rack 2025-2026 image 3
DV8 4Runner Spec Series Roof Rack 2025-2026 image 4
DV8 4Runner Spec Series Roof Rack 2025-2026 image 5
DV8 4Runner Spec Series Roof Rack 2025-2026 image 1

DV8 4Runner Spec Series Roof Rack 2025

$1,299.99
Shipping calculated at checkout Shipping, returns and fit

Fit: Fits Toyota 4Runner 2025 (6th Gen). Bolt-on Spec Series roof rack.

Shipping: The rate for this item is calculated at checkout from your address. It is not part of the $199 free shipping offer. Oversized parcel.

Returns: 30 days on new items in the original packaging. If the item arrived damaged or defective, we sent the wrong item, or our page listed your vehicle and it does not fit, we cover the return shipping and there is no restocking fee. Any other return ships back at your cost with a restocking fee of 5% of product cost.

Why buy from us: DV8 Spec Series roof rack for the 4Runner. Shipping is calculated at checkout. 30-day returns; items should be new and in the original packaging.

Secure checkout Amazon American Express Apple Pay Google Pay Mastercard PayPalShop Pay Visa
Description

The DV8 Offroad Spec Series roof rack is a DV8 4Runner roof rack for the 2025 Toyota 4Runner, the 6th Gen. It has the lowest-profile fit DV8 makes, needs no rubber trim because it does not touch the body panels, and works with sunroof models with no changes.

Ten 80/20 T-slot crossbars take M6 T-nuts, M6 slots run along the top and rear, and full-length side slots take scene lights and recovery tools. The rear crossmember mounts up to a 40 in light bar. Steel mounting feet spread the load for rooftop tents and storage boxes, and removable rear styling fins make room for flush-mounted awnings and tents.

The rack assembles on the ground, so you can mount a tent and accessories and then lift the whole assembly onto the pre-installed feet, securing the outward-facing bolts from outside. A 90 degree bend in the sidewalls adds rigidity and carries mounting slots the full length of the rack. The angled fairing matches the 4Runner's body lines and keeps wind noise low.

Why it works

  • Ten 80/20 T-slot crossbars for M6 T-nuts
  • M6 slots along the top and rear
  • Full-length side slots for scene lights
  • Mounts a 40 in rear light bar
  • Steel mounting feet
  • Removable rear styling fins for flush tent and awning mounts
  • Outward-facing mounting bolts for easy install
  • No rubber trim needed, no contact with body panels
  • Works with sunroof models

Fit

Fits: 2025 Toyota 4Runner, the 6th Gen, per DV8.

Roof load: check your owner's manual for the weight capacity of the roof mounting points. Weight above the roof line changes the vehicle's center of gravity.

Light cutout fairing: optional, sold separately.

Order now; we check fit against your vehicle after you order and contact you before it ships if anything doesn't match.

Specs

  • Crossbars: 10, 80/20 T-slot, M6 T-nuts
  • Material: aluminum with a gloss black steel accent plate
  • Feet: steel
  • Rear light bar: up to 40 in
  • Finish: micro-texture black powder coat
  • Sunroof: works with no changes

In the box

  • Spec Series roof rack
  • Mounting feet and hardware

Warranty

Covered by the DV8 Offroad manufacturer warranty.

Shipping and returns

Ships by ground as a large parcel to the lower 48 states.

Shipping policy | Refund policy

Shop more 6th Gen 4Runner

Questions

Does the DV8 Spec Series rack need rubber trim or changes for a sunroof?
No. DV8 says the Spec Series rack does not touch the 4Runner's body panels, so no rubber trim is needed, and sunroof models work with no changes. DV8 calls it the lowest profile fit it makes for the 4Runner.
Can I load my rooftop tent onto the rack before it goes on the roof?
Yes. The mounting bolts sit on the outer edge of the sidewalls, so DV8 says you can build the rack on the ground, mount your tent and accessories, lift the whole assembly onto the pre-installed roof rail mounting feet and tighten the bolts from outside.
How many people and how much time does the DV8 rack install take?
DV8's install manual rates it novice to intermediate and plans on 4 to 5 hours. One person can build the rack, but the manual calls for 3 to 4 people to lift it into place. DV8's product page estimates about 4 hours.
What tools do I need for the Spec Series rack?
DV8's install manual lists #4 and #5 Allen tools, 10mm, 12mm and 13mm sockets or wrenches, and safety glasses.
Where can I mount lights on this rack?
Full length side slots take scene lights, the rear plate has slots for backup lights, and the rear crossbar holds up to a 40 inch light bar, per DV8. A light cutout front fairing is optional and sold separately.
How much weight can I put on the DV8 roof rack?
DV8 does not list a rack rating here. It says to check your owner's manual for the weight capacity of the roof mounting points, and notes that weight above the roof line changes the vehicle's center of gravity.