Big Days Chase Rack Essential, Truck Bed Dirt Bike Rack for 2 Motos with Ramp
Description
The Big Days Chase Rack Essential 2 Moto is a truck bed rack for two dirt bikes, with the in-bed moto ramp included. Bikes ride upright with the tailgate closed, so the hitch stays free and the bed stays open under the rack.
It is the Essential build on the Big Days Chase Rack System, made in Utah.
Why it works
- Carries 2 dirt bikes or motorcycles with the tailgate closed
- Motorcycle ramp and storage mounting brackets included
- Hitch stays clear for towing; camera and sensors stay usable
- About 40 cubic feet of open bed space under the rack
- Moto mounts limit movement of tires and suspension
- Modular T-track system also takes Big Days bike, ski and light bar mounts
Fit
Fits (all model years, per Big Days): Chevrolet Silverado 1500, 2500 and 3500; GMC Sierra 1500, 2500 and 3500; RAM 1500, 2500 and 3500; Toyota Tundra, Tacoma and T100; Nissan Titan and Frontier; Ford F-150, F-250, F-350 and F-450; Jeep Gladiator; Chevrolet Colorado; Ford Ranger; GMC Canyon; Toyota Hilux.
Not compatible: any RAM with RamBox, the 2006 to 2014 Honda Ridgeline, Tesla Cybertruck, Hyundai Santa Cruz, Chevy Avalanche, GMC Hummer EV, and GMC Sierra with the CarbonPro bed. The 2017+ Honda Ridgeline and the Rivian R1T don't work with the standard clamp-on setup, per Big Days.
Bed and load size: 40 to 64 in inside bed width, 4 ft 10 in to 8 ft bed length, motos 125 to 850cc, per Big Days. Trucks with Deck Rail need the Deck Rail clamp. Bolt-on mounting means drilling four 3/8 in holes in the top of the bed rails.
Short beds: per Big Days, beds under 5 ft may need the rear tire shifted toward the center of the bed for the tailgate to close. Ford Maverick uses Big Days' Maverick-specific setup.
Offset adapters: not included in this build. For 2 dirt bikes in a bed under 5'5", Big Days recommends 2 offset adapters, which is one Moto Offset Kit. Beds over 5'5" usually need none, per Big Days.
Tonneau covers: works with T-track tonneau covers (adapter sold separately) or covers that leave at least 3 in of flat bed rail outboard of the cover, per Big Days. Folding and retractable covers work well, tri-fold covers can't fold all the way, and solid one-piece covers do not work. Tonneau setups use the bolt-on mount and skip the lower crossbar, per Big Days.
Order now; we check fit against your vehicle after you order and contact you before it ships if anything doesn't match.
Comparing racks? Our guide to the best truck bed dirt bike rack sets the Chase Rack against other bed-mounted systems on bikes carried, bed fit, install and tailgate use.
Specs
- Bed width: 40 to 64 in inside, adjustable T-track base
- Bed length: 4 ft 10 in to 8 ft
- Rack capacity: up to 900 lb static, per Big Days
- Upper crossbar: 61 in (can be trimmed on request)
- Risers: 3/16 in A36 steel; crossbars: 6560 T6 alloy; mounts: 1/4 in 5052 alloy
- Rack weight: 70 lb
- Height with no mounts: 20 in; with bikes or motos loaded: about 42 in
- Assembly: about 1 hour, beginner level
- Made in Utah
- Moto sizes: 125 to 850cc
- Mounts in this build: 2 motorcycle
In the box
- Risers (rack supports) and upper T-track crossbar
- Pre-installed handles and badges
- Complete hardware kit, bar end caps and a 4 mm Allen wrench
- Mounting hardware for your truck: standard bed clamp, Toyota/Nissan Deck Rail clamp, or bolt-on (drilling required)
- QR code link to instruction videos
Included in the Essential 2 Moto build, per Big Days: Chase Rack base with Stealth Grey handles and badges, 2 motorcycle mounts, 4 tie-down points, motorcycle ramp and storage mounting brackets.
Per moto mount: complete moto mount, 2 tie-down points, T-track hardware and instruction manual.
Warranty
Big Days covers the rack base with a limited lifetime warranty against manufacturer defects, and the mounts and accessories in this build for 3 years against manufacturer defects. Paint and finish defects are covered for 1 year. The warranty is for the original retail buyer and does not transfer.
Shipping and returns
Built to order in Utah. Plan on 5 to 10 business days to build, then 3 to 5 days in transit.
Ships by ground as a large parcel to the lower 48 states.
Gearlanders is an authorized Big Days dealer.
Big Days rack questions
Bed clamp or bolt-on: which mounting is right for my truck?
Bed clamp (no drilling): the rack clamps directly to your truck's bed rails with a mounting kit matched to your truck. If your bed rails have a factory track with tie-down points, common on Toyota trucks, the clamp uses the Deck Rail kit instead, also with no drilling.
Bolt-on (permanent, drilling required): the rack bolts directly to your bed rails for a permanent install. You drill four 3/8 in holes into the top of your bed side rails, so you need a power drill and a 3/8 in bit.