C4 Tundra Overland Front Full-Height Bull Bar + Hoops 2022-2025 image 1
C4 Tundra Overland Front Full-Height Bull Bar + Hoops 2022-2025 image 2
C4 Tundra Overland Front Full-Height Bull Bar + Hoops 2022-2025 image 3
C4 Tundra Overland Front Full-Height Bull Bar + Hoops 2022-2025 image 4
C4 Tundra Overland Front Full-Height Bull Bar + Hoops 2022-2025 image 5
C4 Tundra Overland Front Full-Height Bull Bar + Hoops 2022-2025 image 6

C4 Tundra Overland Front Full-Height Bull Bar + Hoops 2022-2025

$2,659.00
Flat $99 freight shipping Shipping, returns and fit

Fit: Fits Toyota Tundra 3rd Gen 2022-2025. Full-height bull bar with headlight hoops. TSS and parking sensor compatible per maker. TSS recalibration may be required. Minor bumper and flare trimming required.

Shipping: Ships by freight to the Lower 48 for a flat $99, added at checkout. This item is not part of the $199 free shipping offer.

Returns: 30 days on new items in the original packaging. If the item arrived damaged or defective, we sent the wrong item, or our page listed your vehicle and it does not fit, we cover the return shipping, freight included, and there is no restocking fee. Any other return ships back at your cost with a restocking fee of 5% of product cost.

Freight deliveries: check the shipment and note any damage on the delivery receipt before you sign. After signing, we cannot accept a return for a change of mind or for damage that was not noted. A fit problem from our listing is still covered.

Why buy from us: C4 Fabrication Overland front with full-height bar and headlight hoops for the Tundra. Ships from the maker. Customer pays $99 flat-rate freight. 30-day returns on unused items in original packaging.

Shipping policyReturn policy

Secure checkout Amazon American Express Apple Pay Google Pay Mastercard PayPalShop Pay Visa
Not sure it fits your rig? Ask about fit
Description

The C4 Fabrication Overland Series front bumper for the 3rd gen Toyota Tundra adds rugged off-road ability while keeping Toyota Safety Sense, the parking sensors and the front camera working. This version has the full-height bull bar with headlight hoops.

The bumper is 3/16 in laser-cut P&O steel with 1/4 in mounting and winch plates and fully welded 3/4 in D-ring tabs. The bull bar is .120 wall HREW tube in 1-3/4 and 1-1/2 in. It is designed for a 40 in single row light bar, specifically the Baja Designs S8, and a pair of Baja Designs Squadron fog lights.

Why it works

  • Full-height bull bar with headlight hoops
  • 3/16 in laser-cut P&O steel
  • 1/4 in mounting and winch plates
  • Fully welded 3/4 in D-ring tabs
  • Fits most 8k to 12k winches; verified with WARN VR and ZEON 10k and 12k
  • Designed for a 40 in single row bar (Baja Designs S8)
  • Pockets for a pair of Baja Designs Squadron fog lights
  • Keeps TSS, parking sensors and the front camera

Fit

Fits: 2022-2025 Toyota Tundra, the 3rd Gen.

Install: cut the plastic bumper panels under each headlight and trim the fender flare ends. TSS recalibration may be needed, and the parking sensors must be oriented as the install video shows.

Not kept: the OE fog lights.

Fairlead: synthetic rope and a hawse fairlead recommended; some roller fairleads are too large.

Order now; we check fit against your vehicle after you order and contact you before it ships if anything doesn't match.

Specs

  • Part number: 1400-3122-FHH-01NA
  • Bull bar tube: .120 wall HREW, 1-3/4 and 1-1/2 in
  • Finish: powder coat
  • Weight: about 182 lb

In the box

  • Overland front bumper with full-height bull bar and headlight hoops
  • Mounting hardware

Warranty

Covered by the C4 Fabrication manufacturer warranty.

Shipping and returns

Ships by truck freight to the lower 48 states.

Shipping policy | Refund policy

Shop more 3rd Gen Tundra

Questions

Which winches fit this bumper?
Most 8k to 12k winches. C4 has verified the WARN VR and ZEON series in 10k and 12k sizes. It recommends synthetic rope with a hawse fairlead, since some roller fairleads are too large for the recessed fairlead plate.
Does a skid plate come with it?
Yes. C4 includes a steel front skid plate that replaces the factory plastic one.
Can I reuse my factory fog lights?
No. The pockets are designed for one pair of Baja Designs Squadron fog lights. C4 says LP9 lights also fit this version, though the bumper is not pre-drilled for them.
Why do my parking sensors act up after install?
C4 says the sensors must be oriented as the install video shows. It also recommends the truck sit level, since too much forward rake can make the sensors more sensitive. TSS may ask for recalibration after the move.
What gets cut during the install?
The plastic bumper panel under each headlight and the ends of the fender flares. The bumper has holes to reattach the factory fender liners.

Recently Viewed

Copyright © Gearlanders 2026