BODYARMOR4x4 E-Power board step deployed on a red Toyota 4Runner
4Runner 6th Gen E-Power Board Steps 1
4Runner 6th Gen E-Power Board Steps 2

4Runner 6th Gen E-Power Board Steps

$1,150.00
Shipping calculated at checkout Shipping, returns and fit

Fit: Fits 2025-2026 Toyota 4Runner, gas models only (not hybrid). No-drill install.

Shipping: The rate for this item is calculated at checkout from your address. It is not part of the $199 free shipping offer. Oversized parcel.

Returns: 30 days on new items in the original packaging. If the item arrived damaged or defective, we sent the wrong item, or our page listed your vehicle and it does not fit, we cover the return shipping and there is no restocking fee. Any other return ships back at your cost with a restocking fee of 5% of product cost.

Why buy from us: Body Armor 4x4 E-Power board steps for the 6th Gen 4Runner, gas models only (not hybrid). Ships as an oversized parcel, shipping calculated at checkout. 30-day returns on unused items in original packaging.

Shipping policyReturn policy

Secure checkout Amazon American Express Apple Pay Google Pay Mastercard PayPalShop Pay Visa
Not sure it fits your rig? Ask about fit
Description

These 4Runner power board steps, the Body Armor 4x4 E-Power for the 6th gen Toyota 4Runner, are 6 in wide, full cab length steps that deploy and retract automatically when you open and close the doors. The low profile design keeps ground clearance and protects the rocker panels.

A single-motor setup lowers the risk of motor failure, and data line integration replaces magnets for a faster, cleaner setup. Integrated LED lights, a textured step surface and an auto safe-stop come standard, with an IP67 waterproof rating, 660 lb per side and a no-drill install.

Why it works

  • 6 in wide, full cab length steps
  • Deploy and retract automatically with the doors
  • Single-motor configuration
  • Data line integration, no magnets
  • Integrated LED lights
  • Auto safe-stop if an obstruction is detected
  • IP67 waterproof rating
  • 660 lb capacity each side
  • No-drill install

Fit

Fits: 2025-2026 Toyota 4Runner, the 6th Gen.

Not for: the 4Runner hybrid.

Order now; we check fit against your vehicle after you order and contact you before it ships if anything doesn't match.

Specs

  • Part number: TR-4601
  • Width: 6 in
  • Capacity: 660 lb per side
  • Rating: IP67
  • Material: powder coated high grade aluminum

In the box

  • Pair of E-Power board steps
  • Motor and wiring
  • Mounting hardware

Warranty

Body Armor 4x4 lists a 1 year electrical and 3 year mechanical warranty.

Shipping and returns

Ships by ground as a large parcel to the lower 48 states.

Shipping policy | Refund policy

Shop more 6th Gen 4Runner

Questions

How do the E-Power steps know when a door opens?
They tap the 4Runner's CAN data line. The install guide has you connect the harness at the white factory CAN junction connector under the steering wheel behind the kick panel, so no door magnets are used.
Where do the step brackets mount?
To threaded inserts on the rocker panel under the doors. You remove the factory bolts at the front and rear mounting points with a 12 mm socket and bolt the brackets in their place, with no drilling.
Does the system wire to the battery?
Yes. The main harness connects to the battery terminals with its 25A fuse pulled during hookup, and the ECU mounts away from engine heat with the included adhesive tape.
Will this fit a 4Runner hybrid?
Body Armor 4x4's product page lists the steps as excluding the hybrid model, and our page says the same.
What happens if something blocks the step?
An auto safe-stop halts the step if it detects an obstruction. Each side is rated for 660 lb, and the system carries an IP67 waterproof rating.
Can I hold the steps down while I wash the truck?
Body Armor offers an optional toggle switch accessory, sold separately, with its own instruction sheet. The standard kit deploys and retracts with the doors.

Recently Viewed

Copyright © Gearlanders 2026