C4 4Runner Overland High Clearance Rear Bumper 2025-2026 image 1
C4 4Runner Overland High Clearance Rear Bumper 2025-2026 image 2
C4 4Runner Overland High Clearance Rear Bumper 2025-2026 image 3
C4 4Runner Overland High Clearance Rear Bumper 2025-2026 image 4
C4 4Runner Overland High Clearance Rear Bumper 2025-2026 image 5
C4 4Runner Overland High Clearance Rear Bumper 2025-2026 image 6

C4 4Runner Overland High Clearance Rear Bumper 2025-2026

$2,699.00
Flat $99 freight shipping Shipping, returns and fit

Fit: Fits Toyota 4Runner 6th Gen 2025-2026. Plastic bumper cutting required. Not compatible with electric hatch kick sensor.

Shipping: Ships by freight to the Lower 48 for a flat $99, added at checkout. This item is not part of the $199 free shipping offer.

Returns: 30 days on new items in the original packaging. If the item arrived damaged or defective, we sent the wrong item, or our page listed your vehicle and it does not fit, we cover the return shipping, freight included, and there is no restocking fee. Any other return ships back at your cost with a restocking fee of 5% of product cost.

Freight deliveries: check the shipment and note any damage on the delivery receipt before you sign. After signing, we cannot accept a return for a change of mind or for damage that was not noted. A fit problem from our listing is still covered.

Why buy from us: C4 Fabrication Overland high-clearance rear bumper for the 6th Gen 4Runner. Ships by truck freight, with a flat freight charge shown at checkout. 30-day returns; items should be new and in the original packaging.

Shipping policyReturn policy

Secure checkout Amazon American Express Apple Pay Google Pay Mastercard PayPalShop Pay Visa
Not sure it fits your rig? Ask about fit
Description

The C4 Fabrication Overland high clearance rear bumper for the 6th gen Toyota 4Runner adds rear protection, more ground clearance and better rear lighting. This C4 4Runner rear bumper has a low profile design that maximizes departure angle on technical terrain.

The shell is laser-cut 3/16 in P&O steel on 1/4 in steel mounting brackets, and the mounting system adjusts in every direction to dial in the fit. Fully welded 3/4 in thick D-ring tabs come standard. This version is the base bumper with no swing arms, and swing arms cannot be added to it later.

Why it works

  • Low profile design maximizes departure angle
  • Laser-cut 3/16 in P&O steel shell
  • 1/4 in steel mounting brackets, adjustable in every direction
  • Fully welded 3/4 in D-ring tabs
  • Light mounts made for Baja Designs S2 flush mounts; Rigid SR-M 2x3 also fit
  • Keeps OEM parking sensors, blind spot monitoring and the factory hitch
  • Works with the C4 Summit hatch ladder

Fit

Fits: 2025-2026 Toyota 4Runner, the 6th Gen.

Not for: the electric hatch kick sensor.

Version: powder coat, no swing arms. Swing arms cannot be added later.

Install: the plastic factory bumper must be cut; two people recommended.

Order now; we check fit against your vehicle after you order and contact you before it ships if anything doesn't match.

Specs

  • Part number: 1125-41000-01NA
  • Shell: 3/16 in laser-cut P&O steel
  • Brackets: 1/4 in steel
  • Recovery: 3/4 in welded D-ring tabs
  • Weight: about 160 lb (no swing arms)

In the box

  • Overland high clearance rear bumper, powder coated
  • Mounting hardware

Warranty

Covered by the C4 Fabrication manufacturer warranty.

Shipping and returns

Ships by truck freight to the lower 48 states.

Shipping policy | Refund policy

Shop more 6th Gen 4Runner

Questions

Does the C4 high clearance rear bumper work with the 4Runner hatch kick sensor?
No. C4 Fabrication says this Overland rear bumper for the 6th Gen Toyota 4Runner, listed for 2025 and 2026, is not compatible with the electric hatch kick sensor. Everything else at the rear stays usable, including the factory hitch.
Can swing arms be added to the C4 rear bumper later?
Not to this version. C4 Fabrication sells the bumper with no swing arms, a half length arm, a single full length arm or dual arms, and says swing arms cannot be added later to the no swing arm bumper. The swing arm versions take up to a 35 in tire with an anti rattle latch.
Which pod lights fit the C4 4Runner rear bumper?
C4 Fabrication designed the two pod light mounts specifically for Baja Designs S2 Flush Mount lights, and says Rigid SR-M 2x3 lights also fit. C4 cannot guarantee a perfect fit for other light brands, so those two are the safe picks for added rear lighting.
Does blind spot and park assist tech survive the C4 rear bumper swap?
Yes. C4 Fabrication says the bumper keeps the factory parking sensors and blind spot monitoring, and leaves access to the OEM hitch. Its low profile design is shaped to maximize departure angle on technical terrain while adding rear protection and ground clearance.
How is the C4 Overland rear bumper built?
C4 Fabrication uses a laser cut 3/16 in P&O steel shell on 1/4 in steel mounting brackets, and the mounting system adjusts in every direction to dial in the fit. The 3/4 in thick D-ring tabs come standard and are fully welded front and back for strength.
Why does C4 suggest two installers for this rear bumper?
Weight, mainly: C4 Fabrication lists the base bumper at 160 lb and recommends two people, and the install requires cutting the plastic factory bumper. C4's optional 2 stage hammer black powder coat protects it from the elements; a raw bumper must be painted or powder coated before installation to prevent rust.

Recently Viewed

Copyright © Gearlanders 2026