{"title":"Sequoia (2023+)","description":"\u003ch1\u003eBuild your Sequoia (2023+) with live roof, bumper, and skid gear.\u003c\/h1\u003e\n\u003cp\u003eThis page is for the 3rd Gen Toyota Sequoia (2023+) only. Older Sequoia generations are not included.\u003c\/p\u003e\n\u003cp\u003eShop Sequoia fitment: Prinsu Pro roof rack, ladder, and PRO accessory panel; CBI Covert bumper, bull bar, rear bumper, and side steps; plus front and transition skids. Racks and bumpers ship freight billed at checkout.\u003c\/p\u003e","products":[{"product_id":"dv8-offroad-3rd-gen-tundra-a-arm-skid-plates","title":"DV8 Offroad 3rd Gen Tundra \u0026 Sequoia Front Lower Control Arm Skid Plates 2022-2026","description":"\u003cp dir=\"auto\"\u003eThe DV8 Offroad Front Lower Control Arm Skid Plates safeguard the vulnerable lower control arms (A-arms) on the 3rd Gen Toyota Tundra and Sequoia, which sit low and are prone to impacts from rocks, roots, and debris on off-road trails. Crafted from thick 4.5mm steel, these plates provide solid protection for the front suspension components while maintaining a factory-like fit. The design uses carriage bolts to secure the skid directly to the control arm, shielding the mounting hardware from damage during trail use. A micro-texture black powder coat finish delivers durability against corrosion and a clean, understated appearance that complements overland builds.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThese skids integrate seamlessly with factory TRD suspension setups and the factory TRD skid plate, allowing layered protection without interference. Installation is straightforward with included black M8 hardware, no cutting required, and most owners complete it in about 30 minutes. At roughly 19 lbs per pair, they add meaningful defense without excessive weight penalty. Ideal for overlanders and off-road enthusiasts running rocky desert or mountain trails where front-end strikes are common, these plates help preserve suspension integrity and reduce repair costs from trail damage. Direct fit for all trims.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eProtects lower control arms from rocks, debris, and trail impacts\u003c\/li\u003e\n\u003cli\u003eShields mounting bolts with carriage bolt design to prevent hardware damage\u003c\/li\u003e\n\u003cli\u003eCompatible with factory TRD suspension and factory TRD skid plate for full front-end protection\u003c\/li\u003e\n\u003cli\u003eDurable 4.5mm steel construction with micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eIncludes black M8 hardware for secure, straightforward installation\u003c\/li\u003e\n\u003cli\u003eQuick install with no cutting or major modifications needed\u003c\/li\u003e\n\u003cli\u003eFeatures paintable aluminum logo plate for customization option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment\u003c\/strong\u003e: 2022-2026 Toyota Tundra (all trims); 2023 Sequoia\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: 4.5mm steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: ~19 lbs (pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation\u003c\/strong\u003e: Estimated 0.5 hour (30 minutes); direct fit, no cutting required; black M8 hardware included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility Notes\u003c\/strong\u003e: Compatible with factory TRD suspension and factory TRD skid plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWHO THIS IS FOR\u003c\/strong\u003e 3rd Gen Toyota Tundra (2022-2026) and 2023 Sequoia owners who venture off pavement into rocky or technical terrain for overlanding, camping, or trail running. Suited for those with stock or TRD-equipped front ends wanting added suspension protection without custom fabrication or clearance loss.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFAQs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"auto\"\u003e\n\u003cstrong\u003eWhat models do these skid plates fit?\u003c\/strong\u003e They fit 2022-2025 Toyota Tundra (all trims) and 2023 Sequoia.\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003e\n\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eAre they compatible with factory TRD suspension and skid plate?\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e Yes, fully compatible with both factory TRD suspension and the factory TRD skid plate.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003e\n\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eIs cutting or modification required for installation?\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e No, it's a direct fit with no cutting required.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003e\n\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eWhat hardware is included?\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e Black M8 carriage bolts and hardware are included for installation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003e\n\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eHow long does installation typically take?\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e Estimated 30 minutes (0.5 hours), though time may vary by experience.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":41693676863533,"sku":"SPT2-01","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/tundra-lca-skid-plate2.png?v=1689608730"},{"product_id":"prinsu-pro-toyota-sequoia-roof-rack-2023-2026","title":"Prinsu Pro Toyota Sequoia Roof Rack 2023-2026","description":"\u003cp dir=\"auto\"\u003eThis listing is the Prinsu Pro roof rack for the \u003cstrong\u003e2023-2026 Toyota Sequoia only\u003c\/strong\u003e. Confirm your model year before you order. It is not a Tacoma, 4Runner, or Land Cruiser kit.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe platform is a no-drill aluminum Pro rack built for Sequoia cargo and overland loads. Pro crossbars are published as about 44% stronger than earlier Prinsu bars, with six drop-in points per bar, a two-part side rail that increases rigidity, a bend on top of the Pro side rail, recessed bolt-on mounting feet, powder-coated aluminum, and corrosion-resistant stainless hardware. Sheet parent weight is about 87.7 lb.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eChoose Wind Deflector Type at checkout. Standard (SKU 400-002-030-003) is a solid front face. Light Bar Cutout (SKU 400-002-030-004) is the same rack with a cutout for a 40 inch light bar. Pair the cutout option with our Heretic 40 Inch LED Light Bar if you want the bar in the same cart.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePrice is MAP (Regular price). Sale-event numbers on the dealer sheet are ignored. Freight is billed at checkout. Typical Prinsu Pro build lead is about 5 weeks as a manufacturer estimate only.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFits 2023-2026 Toyota Sequoia only\u003c\/li\u003e\n\u003cli\u003eNo-drill bolt-on installation (manufacturer published)\u003c\/li\u003e\n\u003cli\u003ePro crossbars published about 44% stronger, with 6 integrated drop-in points per bar\u003c\/li\u003e\n\u003cli\u003eTwo-part side rail design increases rigidity; bend on top of Pro side rail\u003c\/li\u003e\n\u003cli\u003eRecessed bolt-on mounting feet; powder-coated aluminum; stainless hardware\u003c\/li\u003e\n\u003cli\u003eWind Deflector Type: Standard or Light Bar Cutout\u003c\/li\u003e\n\u003cli\u003eDrop-ship; inventory tracking off; freight billed at checkout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFitment: Toyota Sequoia 2023-2026 only\u003c\/li\u003e\n\u003cli\u003eDoes not fit: other Toyota trucks\/SUVs on this page\u003c\/li\u003e\n\u003cli\u003eMount: No-drill (manufacturer published)\u003c\/li\u003e\n\u003cli\u003eConstruction: Powder-coated aluminum; corrosion-resistant stainless hardware\u003c\/li\u003e\n\u003cli\u003eApprox. weight: 87.7 lb (sheet parent)\u003c\/li\u003e\n\u003cli\u003eWind deflector SKUs: 400-002-030-003 Standard, 400-002-030-004 Light Bar Cutout\u003c\/li\u003e\n\u003cli\u003eMAP: $1720.00 each (Regular price)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSHIPPING AND LEAD TIME:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFreight is \u003cstrong\u003ebilled at checkout\u003c\/strong\u003e. The customer pays outbound freight on this oversize drop-ship rack.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply. Do not expect free Ground.\u003c\/li\u003e\n\u003cli\u003eLead time: manufacturer estimate for Prinsu Pro is about \u003cstrong\u003e5 weeks\u003c\/strong\u003e (CBI lead-times guidance as of 2026-09-05). That is an estimate, not a guarantee.\u003c\/li\u003e\n\u003cli\u003eShips drop-ship from the manufacturer. Inventory tracking is off on this listing. We continue to sell when quantity is zero.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWHO THIS IS FOR?\u003c\/strong\u003e 2023-2026 Sequoia owners who want a USA-made Prinsu Pro roof platform for a rooftop tent or trail load, will stay on Sequoia fitment only, and can plan freight billed at checkout plus a ~5 week build estimate.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFAQs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does it fit?\u003c\/strong\u003e Toyota Sequoia 2023-2026 only. Not Tacoma, 4Runner, or Land Cruiser on this page.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich wind deflector do I pick?\u003c\/strong\u003e Standard for a solid face. Light Bar Cutout if you run a 40 inch bar through the front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWho pays shipping?\u003c\/strong\u003e You do. Freight is billed at checkout. Free shipping does not apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e About 5 weeks is the typical Prinsu Pro estimate. It is not a guaranteed date.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs it in our warehouse?\u003c\/strong\u003e No. It drop-ships from the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prinsu","offers":[{"title":"Standard","offer_id":67489605550125,"sku":"400-002-030-003","price":1720.0,"currency_code":"USD","in_stock":true},{"title":"Light Bar Cutout","offer_id":67489605582893,"sku":"400-002-030-004","price":1720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/sequoia_00963_c6474ba4-472b-4ea2-aa39-8e5a60ad49bf.webp?v=1788733524"},{"product_id":"cbi-toyota-sequoia-covert-bumper-2023-2026","title":"CBI Toyota Sequoia Covert Bumper 2023-2026","description":"\u003cp dir=\"auto\"\u003eThis listing is the CBI Offroad Covert front bumper for the \u003cstrong\u003e2023-2026 Toyota Sequoia only\u003c\/strong\u003e. It is engineered to follow factory body lines while adding winch capability, recovery points, and light-bar mounts without inventing features beyond the dealer sheet.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe Covert bumper uses a 2-piece design for easier install. It retains factory sensors, includes built-in rugged recovery points that align to the frame, mounts for a 20 inch single-row light bar, and an integrated winch tray constructed from 1\/4 inch steel that fits a winch up to 12,000 lb. A bolt-on push bar \/ bull bar is sold separately and is not included on this page.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePrice is MAP (Regular price $1260). Sale-event numbers on the dealer sheet are ignored. Freight is billed at checkout. Sheet weight is about 170 lb. This is a heavy oversize drop-ship bumper.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFits 2023-2026 Toyota Sequoia only\u003c\/li\u003e\n\u003cli\u003e2-piece design for easier installation\u003c\/li\u003e\n\u003cli\u003eRetains factory sensors\u003c\/li\u003e\n\u003cli\u003eBuilt-in rugged recovery points aligned to the frame\u003c\/li\u003e\n\u003cli\u003eMounting points for a 20 inch single-row light bar\u003c\/li\u003e\n\u003cli\u003eIntegrated winch tray: 1\/4 inch steel; fits up to a 12,000 lb winch\u003c\/li\u003e\n\u003cli\u003eBolt-on push bar \/ bull bar sold separately (not included)\u003c\/li\u003e\n\u003cli\u003eDrop-ship; inventory tracking off; freight billed at checkout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFitment: Toyota Sequoia 2023-2026 only\u003c\/li\u003e\n\u003cli\u003eSKU: 200-000-030-001\u003c\/li\u003e\n\u003cli\u003eApprox. weight: 170 lb (sheet)\u003c\/li\u003e\n\u003cli\u003eWinch tray: 1\/4 inch steel; up to 12,000 lb winch\u003c\/li\u003e\n\u003cli\u003eSensors: retains factory sensors (sheet)\u003c\/li\u003e\n\u003cli\u003eLight bar mounts: 20 inch single-row (sheet)\u003c\/li\u003e\n\u003cli\u003eMAP: $1260.00 (Regular price)\u003c\/li\u003e\n\u003cli\u003eNot included: bull bar add-on SKU 200-000-030-002\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSHIPPING AND LEAD TIME:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFreight is \u003cstrong\u003ebilled at checkout\u003c\/strong\u003e. The customer pays outbound freight on this heavy drop-ship bumper.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply. Do not expect free Ground.\u003c\/li\u003e\n\u003cli\u003eShips drop-ship from the manufacturer. Inventory tracking is off on this listing. We continue to sell when quantity is zero.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWHO THIS IS FOR?\u003c\/strong\u003e 2023-2026 Sequoia owners who want a Covert-style winch bumper that keeps factory sensors and body lines, and who can plan customer-paid freight on a ~170 lb drop-ship bumper.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFAQs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does it fit?\u003c\/strong\u003e Toyota Sequoia 2023-2026 only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes it keep factory sensors?\u003c\/strong\u003e Yes. The dealer sheet states it retains factory sensors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the bull bar included?\u003c\/strong\u003e No. The bolt-on push bar \/ bull bar is sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWho pays shipping?\u003c\/strong\u003e You do. Freight is billed at checkout. Free shipping does not apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs it in our warehouse?\u003c\/strong\u003e No. It drop-ships from the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CBI Offroad","offers":[{"title":"Default Title","offer_id":67489605681197,"sku":"200-000-030-001","price":1260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/sequoia_01038_82129a0b-f57c-4cfb-ab74-08e8c21615c3.webp?v=1788733508"},{"product_id":"cbi-toyota-sequoia-covert-bull-bar-2023-2026","title":"CBI Toyota Sequoia Covert Bull Bar Add-On 2023-2026","description":"\u003cp dir=\"auto\"\u003eThis listing is the CBI Offroad Covert bull bar add-on for the \u003cstrong\u003e2023-2026 Toyota Sequoia Covert front bumper only\u003c\/strong\u003e. It bolts onto the Covert bumper. The Covert bumper itself is sold separately and is not included here.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eUse this page when you already have the Covert bumper, or when you want both in the same cart. Pair it with our Sequoia Covert Bumper listing. Sheet MAP is $150. Sheet weight is about 185 lb. Freight is billed at checkout.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePrice is MAP (Regular price). Sale-event numbers on the dealer sheet are ignored.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eBolts on to the Sequoia Covert Bumper (2023-2026)\u003c\/li\u003e\n\u003cli\u003eDoes not include the Covert Series front bumper\u003c\/li\u003e\n\u003cli\u003eGrill-guard style add-on designed for Sequoia body lines (sheet)\u003c\/li\u003e\n\u003cli\u003eDrop-ship; inventory tracking off; freight billed at checkout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFitment: Toyota Sequoia 2023-2026 Covert bumper add-on only\u003c\/li\u003e\n\u003cli\u003eSKU: 200-000-030-002\u003c\/li\u003e\n\u003cli\u003eApprox. weight: 185 lb (sheet)\u003c\/li\u003e\n\u003cli\u003eMAP: $150.00 (Regular price)\u003c\/li\u003e\n\u003cli\u003eNot included: Covert bumper SKU 200-000-030-001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSHIPPING AND LEAD TIME:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFreight is \u003cstrong\u003ebilled at checkout\u003c\/strong\u003e. The customer pays outbound freight on this drop-ship part.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply. Do not expect free Ground.\u003c\/li\u003e\n\u003cli\u003eShips drop-ship from the manufacturer. Inventory tracking is off on this listing. We continue to sell when quantity is zero.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWHO THIS IS FOR?\u003c\/strong\u003e 2023-2026 Sequoia owners who already run or are ordering the CBI Covert bumper and want the matching bolt-on bull bar add-on, with customer-paid freight.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFAQs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the Covert bumper included?\u003c\/strong\u003e No. This is the bull bar add-on only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does it bolt to?\u003c\/strong\u003e The 2023-2026 Sequoia Covert front bumper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWho pays shipping?\u003c\/strong\u003e You do. Freight is billed at checkout. Free shipping does not apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs it in our warehouse?\u003c\/strong\u003e No. It drop-ships from the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CBI Offroad","offers":[{"title":"Default Title","offer_id":67489621409837,"sku":"200-000-030-002","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/sequoia_01038_6b352614-b8fd-4d50-8fac-3c5dac955753.webp?v=1788733515"},{"product_id":"cbi-toyota-sequoia-classic-rear-bumper-2023-2026","title":"CBI Toyota Sequoia Classic Rear Bumper 2023-2026","description":"\u003cp dir=\"auto\"\u003eThis listing is the CBI Offroad Classic rear bumper for the \u003cstrong\u003e2023-2026 Toyota Sequoia only\u003c\/strong\u003e. It is built to improve rear exit angle on steep trails while adding wrap-around steel protection.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eSheet features include wrap-around protection, integrated recovery points, solid 7GA steel construction, an integrated hitch receiver cover, retention of factory blind spot monitors and proximity sensors (per sheet), and cut-outs for flush-fit reverse lights (Baja Designs S2 pattern \/ Rigid SR-M). Choose Finish at checkout: Bare Metal or Powder Coat Black.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePrice is MAP (Regular price). Sale-event numbers on the dealer sheet are ignored. Freight is billed at checkout. Variation sheet weight is about 340 lb. Typical built-to-order lead is about 5 weeks as a manufacturer estimate only.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFits 2023-2026 Toyota Sequoia only\u003c\/li\u003e\n\u003cli\u003eWrap-around rear protection; integrated recovery points\u003c\/li\u003e\n\u003cli\u003eSolid 7GA steel construction; integrated hitch receiver cover\u003c\/li\u003e\n\u003cli\u003eRetains factory blind spot monitors and proximity sensors (sheet)\u003c\/li\u003e\n\u003cli\u003eCut-outs for Baja Designs S2 \/ Rigid SR-M flush reverse lights\u003c\/li\u003e\n\u003cli\u003eFinish: Bare Metal or Powder Coat Black\u003c\/li\u003e\n\u003cli\u003eDrop-ship; inventory tracking off; freight billed at checkout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFitment: Toyota Sequoia 2023-2026 only\u003c\/li\u003e\n\u003cli\u003eBare Metal SKU 200-000-030-003 MAP $2500.00\u003c\/li\u003e\n\u003cli\u003ePowder Coat Black SKU 200-000-030-004 MAP $2800.00\u003c\/li\u003e\n\u003cli\u003eApprox. weight: 340 lb (variation sheet)\u003c\/li\u003e\n\u003cli\u003eConstruction: 7GA steel (sheet)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSHIPPING AND LEAD TIME:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFreight is \u003cstrong\u003ebilled at checkout\u003c\/strong\u003e. The customer pays outbound freight on this drop-ship part.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply. Do not expect free Ground.\u003c\/li\u003e\n\u003cli\u003eShips drop-ship from the manufacturer. Inventory tracking is off on this listing. We continue to sell when quantity is zero.\u003c\/li\u003e\n\u003cli\u003eLead time: manufacturer estimate for built-to-order CBI\/Prinsu Pro work is about \u003cstrong\u003e5 weeks\u003c\/strong\u003e (guidance as of 2026-09-05). That is an estimate, not a guarantee.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWHO THIS IS FOR?\u003c\/strong\u003e 2023-2026 Sequoia owners who want a USA-made Classic rear bumper with recovery points and sensor retention, and who can plan freight billed at checkout plus a ~5 week build estimate.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFAQs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does it fit?\u003c\/strong\u003e Toyota Sequoia 2023-2026 only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich finish do I pick?\u003c\/strong\u003e Bare Metal or Powder Coat Black at checkout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre sensors kept?\u003c\/strong\u003e Sheet states factory blind spot monitors and proximity sensors are retained.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWho pays shipping?\u003c\/strong\u003e You do. Freight is billed at checkout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e About 5 weeks is a typical built-to-order estimate. It is not a guaranteed date.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CBI Offroad","offers":[{"title":"Bare Metal","offer_id":67489622425645,"sku":"200-000-030-003","price":2500.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":67489622458413,"sku":"200-000-030-004","price":2800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/01_0d73a4bf-586e-4137-9433-f6ab3095e5dc.webp?v=1788646210"},{"product_id":"cbi-toyota-sequoia-side-steps-2023-2026","title":"CBI Toyota Sequoia Side Steps 2023-2026","description":"\u003cp dir=\"auto\"\u003eThis listing is the CBI Offroad body-mounted side steps for the \u003cstrong\u003e2023-2026 Toyota Sequoia only\u003c\/strong\u003e. They are a stepping aid and rocker protection piece, not a rock slider replacement.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eSheet features: custom form-fit body mount against the rocker, steel main structure with aluminum top plates, textured satin black powder-coat on the main body with gray top plates, full-length stepping surface, and bolt-on install using existing factory hardware.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePrice is MAP (Regular price $1200). Sale-event numbers on the dealer sheet are ignored. Sheet weight is about 80 lb. Freight is billed at checkout.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFits 2023-2026 Toyota Sequoia only\u003c\/li\u003e\n\u003cli\u003eBody-mounted form-fit to the rocker panel\u003c\/li\u003e\n\u003cli\u003eSteel main structure with aluminum top plates (sheet)\u003c\/li\u003e\n\u003cli\u003eTextured satin black powder-coat body; gray top plates (sheet)\u003c\/li\u003e\n\u003cli\u003eFull-length stepping surface; bolt-on with factory hardware\u003c\/li\u003e\n\u003cli\u003eDrop-ship; inventory tracking off; freight billed at checkout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFitment: Toyota Sequoia 2023-2026 only\u003c\/li\u003e\n\u003cli\u003eSKU: 300-000-030-001\u003c\/li\u003e\n\u003cli\u003eApprox. weight: 80 lb (sheet)\u003c\/li\u003e\n\u003cli\u003eMAP: $1200.00 (Regular price)\u003c\/li\u003e\n\u003cli\u003eNot a rock slider (body-mounted side step)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSHIPPING AND LEAD TIME:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFreight is \u003cstrong\u003ebilled at checkout\u003c\/strong\u003e. The customer pays outbound freight on this drop-ship part.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply. Do not expect free Ground.\u003c\/li\u003e\n\u003cli\u003eShips drop-ship from the manufacturer. Inventory tracking is off on this listing. We continue to sell when quantity is zero.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWHO THIS IS FOR?\u003c\/strong\u003e 2023-2026 Sequoia owners who want CBI body-mounted side steps for easier entry and rocker coverage, with customer-paid freight.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFAQs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does it fit?\u003c\/strong\u003e Toyota Sequoia 2023-2026 only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this a rock slider?\u003c\/strong\u003e No. These are body-mounted side steps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWho pays shipping?\u003c\/strong\u003e You do. Freight is billed at checkout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs it in our warehouse?\u003c\/strong\u003e No. It drop-ships from the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CBI Offroad","offers":[{"title":"Default Title","offer_id":67489622491181,"sku":"300-000-030-001","price":1200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/01_7b8f6596-773b-431e-b1f6-df723dd5b034.webp?v=1788646219"},{"product_id":"prinsu-toyota-sequoia-ladder-2022-current","title":"Prinsu Toyota Sequoia Ladder 2022-Current","description":"\u003cp dir=\"auto\"\u003eThis listing is the Prinsu ladder for the \u003cstrong\u003e2022-Current Toyota Sequoia\u003c\/strong\u003e when used with a Prinsu roof rack. Confirm your generation before you order.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eSheet features: modular design, welded square tubing sides, formed sheet metal rungs, powder-coated black, lightweight, assembly required, easy install, and drilling on the underside of the hatch required.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePrice is MAP (Regular price $480). Sale-event numbers on the dealer sheet are ignored. Sheet weight is about 16.8 lb. Freight is billed at checkout. Pair with the Sequoia Prinsu Pro roof rack if you need the platform too.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFits Toyota Sequoia 2022-Current with Prinsu rack use case\u003c\/li\u003e\n\u003cli\u003eModular design; welded square tubing sides; formed sheet metal rungs\u003c\/li\u003e\n\u003cli\u003ePowder-coated black; lightweight; assembly required\u003c\/li\u003e\n\u003cli\u003eDrilling on the underside of the hatch required (sheet)\u003c\/li\u003e\n\u003cli\u003eDrop-ship; inventory tracking off; freight billed at checkout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFitment: Toyota Sequoia 2022-Current\u003c\/li\u003e\n\u003cli\u003eSKU: 600-000-000-324\u003c\/li\u003e\n\u003cli\u003eApprox. weight: 16.8 lb (sheet)\u003c\/li\u003e\n\u003cli\u003eMAP: $480.00 (Regular price)\u003c\/li\u003e\n\u003cli\u003eInstall note: hatch underside drilling required (sheet)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSHIPPING AND LEAD TIME:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFreight is \u003cstrong\u003ebilled at checkout\u003c\/strong\u003e. The customer pays outbound freight on this drop-ship part.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply. Do not expect free Ground.\u003c\/li\u003e\n\u003cli\u003eShips drop-ship from the manufacturer. Inventory tracking is off on this listing. We continue to sell when quantity is zero.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWHO THIS IS FOR?\u003c\/strong\u003e 2022-Current Sequoia owners who run a Prinsu roof rack and want a matching ladder for hatch-side access, with customer-paid freight.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFAQs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does it fit?\u003c\/strong\u003e Toyota Sequoia 2022-Current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need to drill?\u003c\/strong\u003e Yes. Sheet states drilling on the underside of the hatch is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWho pays shipping?\u003c\/strong\u003e You do. Freight is billed at checkout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs it in our warehouse?\u003c\/strong\u003e No. It drop-ships from the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prinsu","offers":[{"title":"Default Title","offer_id":67489622523949,"sku":"600-000-000-324","price":480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/01_6fca30c5-80e5-46d9-a00e-d3aef6abd924.webp?v=1788646227"},{"product_id":"cbi-toyota-sequoia-front-overland-skid-2023-2026","title":"CBI Toyota Sequoia Front Overland Skid Plate 2023-2026","description":"\u003cp dir=\"auto\"\u003eThis listing is the CBI Offroad Front Overland skid plate for the \u003cstrong\u003e2023-2026 Toyota Sequoia\u003c\/strong\u003e (3rd Gen). This page lists the clear Steel finish SKUs with MAP from the dealer sheet: Bare Metal, Powder Coat Black, and TRD Grey.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eSheet features: fits all 3rd Gen Sequoia models, easy access to oil drain plug and oil filter after install, 3\/16 inch steel plate construction on these SKUs, undercarriage protection, about 45 minute install. Not compatible with Sway Bar Drop brackets. Can only accommodate up to a 1 inch differential drop.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePrice is MAP (Regular price). Sale-event numbers on the dealer sheet are ignored. Steel variation weight is about 100 lb. Freight is billed at checkout.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFits all 3rd Gen Sequoia models (2023-2026)\u003c\/li\u003e\n\u003cli\u003eOil drain plug and oil filter access after install (sheet)\u003c\/li\u003e\n\u003cli\u003eSteel plate construction on the SKUs listed here (3\/16 inch per sheet family)\u003c\/li\u003e\n\u003cli\u003eFinish options: Bare Metal, Powder Coat Black, TRD Grey\u003c\/li\u003e\n\u003cli\u003eNot compatible with Sway Bar Drop brackets; max ~1 inch differential drop\u003c\/li\u003e\n\u003cli\u003eDrop-ship; inventory tracking off; freight billed at checkout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFitment: Toyota Sequoia 2023-2026 (3rd Gen)\u003c\/li\u003e\n\u003cli\u003eBare Metal Steel SKU 300-000-030-032 MAP $560.00\u003c\/li\u003e\n\u003cli\u003ePowder Coat Black Steel SKU 300-000-030-033 MAP $660.00\u003c\/li\u003e\n\u003cli\u003eTRD Grey Steel SKU 300-000-030-034 MAP $660.00\u003c\/li\u003e\n\u003cli\u003eApprox. weight: 100 lb (steel variation sheet)\u003c\/li\u003e\n\u003cli\u003eAluminum Material SKUs from the sheet are not listed on this PDP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSHIPPING AND LEAD TIME:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFreight is \u003cstrong\u003ebilled at checkout\u003c\/strong\u003e. The customer pays outbound freight on this drop-ship part.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply. Do not expect free Ground.\u003c\/li\u003e\n\u003cli\u003eShips drop-ship from the manufacturer. Inventory tracking is off on this listing. We continue to sell when quantity is zero.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWHO THIS IS FOR?\u003c\/strong\u003e 2023-2026 Sequoia owners who want a CBI Front Overland steel skid with a clear finish choice and customer-paid freight.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFAQs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does it fit?\u003c\/strong\u003e 3rd Gen Toyota Sequoia 2023-2026.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich finish do I pick?\u003c\/strong\u003e Bare Metal, Powder Coat Black, or TRD Grey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSway bar drop brackets?\u003c\/strong\u003e Not compatible (sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWho pays shipping?\u003c\/strong\u003e You do. Freight is billed at checkout.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CBI Offroad","offers":[{"title":"Bare Metal","offer_id":67489622556717,"sku":"300-000-030-032","price":560.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":67489622589485,"sku":"300-000-030-033","price":660.0,"currency_code":"USD","in_stock":true},{"title":"TRD Grey","offer_id":67489622622253,"sku":"300-000-030-034","price":660.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/01_66f0f327-048f-4b4e-bfd2-55530727fce6.webp?v=1788646238"},{"product_id":"cbi-toyota-sequoia-transition-skid-2023","title":"CBI Toyota Sequoia Transition Skid Plate 2023","description":"\u003cp dir=\"auto\"\u003eThis listing is the CBI Offroad Transition skid plate for the \u003cstrong\u003e2023 Toyota Sequoia\u003c\/strong\u003e Covert bumper setup. It fills the gap between the Covert bumper and the front skid plate. Sold separately from both.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eSheet features: protection between Covert bumper and front skid, no cutting or drilling \/ direct bolt-on, 3\/16 inch steel on these SKUs, designed engineered and manufactured in America. Can only accommodate up to a 1 inch differential drop. Choose Finish: Bare Metal, Powder Coat Black, or TRD Grey (Steel MAP SKUs from the sheet).\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePrice is MAP (Regular price). Sale-event numbers on the dealer sheet are ignored. Sheet weight is about 60 lb. Freight is billed at checkout. Pair with the Sequoia Covert Bumper listing.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eSold separately; pairs with Covert bumper + front skid layout\u003c\/li\u003e\n\u003cli\u003eProtection between Covert bumper and front skid plate\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on; no cutting or drilling (sheet)\u003c\/li\u003e\n\u003cli\u003eSteel plate construction on the SKUs listed here\u003c\/li\u003e\n\u003cli\u003eFinish: Bare Metal, Powder Coat Black, TRD Grey\u003c\/li\u003e\n\u003cli\u003eMax ~1 inch differential drop; drop-ship; freight billed at checkout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFitment: Toyota Sequoia 2023 Transition skid (Covert bumper ecosystem)\u003c\/li\u003e\n\u003cli\u003eBare Metal Steel SKU 300-000-030-017 MAP $200.00\u003c\/li\u003e\n\u003cli\u003ePowder Coat Black Steel SKU 300-000-030-018 MAP $260.00\u003c\/li\u003e\n\u003cli\u003eTRD Grey Steel SKU 300-000-030-019 MAP $260.00\u003c\/li\u003e\n\u003cli\u003eApprox. weight: 60 lb (sheet)\u003c\/li\u003e\n\u003cli\u003eAluminum Material SKUs from the sheet are not listed on this PDP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSHIPPING AND LEAD TIME:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFreight is \u003cstrong\u003ebilled at checkout\u003c\/strong\u003e. The customer pays outbound freight on this drop-ship part.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply. Do not expect free Ground.\u003c\/li\u003e\n\u003cli\u003eShips drop-ship from the manufacturer. Inventory tracking is off on this listing. We continue to sell when quantity is zero.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWHO THIS IS FOR?\u003c\/strong\u003e 2023 Sequoia Covert bumper owners who need the transition skid between bumper and front skid, with customer-paid freight.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFAQs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the Covert bumper included?\u003c\/strong\u003e No. This is the transition skid only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does it sit between?\u003c\/strong\u003e Covert bumper and front skid plate (sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWho pays shipping?\u003c\/strong\u003e You do. Freight is billed at checkout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs it in our warehouse?\u003c\/strong\u003e No. It drop-ships from the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CBI Offroad","offers":[{"title":"Bare Metal","offer_id":67489622655021,"sku":"300-000-030-017","price":200.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":67489622687789,"sku":"300-000-030-018","price":260.0,"currency_code":"USD","in_stock":true},{"title":"TRD Grey","offer_id":67489622720557,"sku":"300-000-030-019","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/sequoia_00864.webp?v=1788733491"},{"product_id":"prinsu-toyota-sequoia-pro-accessory-panel-2022-current","title":"Prinsu Toyota Sequoia PRO Accessory Panel 2022-Current","description":"\u003cp dir=\"auto\"\u003eThis listing is the Prinsu PRO Accessory Panel for the \u003cstrong\u003e2022-Current Toyota Sequoia\u003c\/strong\u003e. It mounts to the Prinsu PRO roof rack. Choose Side: Driver or Passenger.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eSheet features: mounts to Prinsu PRO rack, driver and passenger side windows available, mounts to the window using two suction cups, all aluminum construction, multiple accessory mounting options (Power Tanks, Rotopax, Dmos shovel mounts, Mini Maxtrax, Quick Fists, etc.), powder coated black, two-piece design for switching accessories, lightweight.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePrice is MAP (Regular price $475 each). Sale-event numbers on the dealer sheet are ignored. Sheet parent weight is about 12 lb. Freight is billed at checkout. Pair with the Sequoia Prinsu Pro roof rack.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eMounts to Prinsu PRO rack (Sequoia 2022-Current)\u003c\/li\u003e\n\u003cli\u003eSide options: Driver or Passenger\u003c\/li\u003e\n\u003cli\u003eWindow mount with two suction cups; all aluminum; powder coated black\u003c\/li\u003e\n\u003cli\u003eTwo-piece design for switching accessories\u003c\/li\u003e\n\u003cli\u003eAccessory mounts for common overland gear (sheet examples)\u003c\/li\u003e\n\u003cli\u003eDrop-ship; inventory tracking off; freight billed at checkout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFitment: Toyota Sequoia 2022-Current with Prinsu PRO rack\u003c\/li\u003e\n\u003cli\u003eDriver SKU 600-000-000-408 MAP $475.00\u003c\/li\u003e\n\u003cli\u003ePassenger SKU 600-000-000-407 MAP $475.00\u003c\/li\u003e\n\u003cli\u003eApprox. weight: 12 lb (sheet parent)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSHIPPING AND LEAD TIME:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFreight is \u003cstrong\u003ebilled at checkout\u003c\/strong\u003e. The customer pays outbound freight on this drop-ship part.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply. Do not expect free Ground.\u003c\/li\u003e\n\u003cli\u003eShips drop-ship from the manufacturer. Inventory tracking is off on this listing. We continue to sell when quantity is zero.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWHO THIS IS FOR?\u003c\/strong\u003e 2022-Current Sequoia owners who already run or are ordering a Prinsu PRO rack and want a driver or passenger PRO accessory panel, with customer-paid freight.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFAQs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does it mount to?\u003c\/strong\u003e Prinsu PRO rack on 2022-Current Sequoia.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver or Passenger?\u003c\/strong\u003e Pick Side at checkout. SKUs differ.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWho pays shipping?\u003c\/strong\u003e You do. Freight is billed at checkout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs it in our warehouse?\u003c\/strong\u003e No. It drop-ships from the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prinsu","offers":[{"title":"Driver","offer_id":67489622753325,"sku":"600-000-000-408","price":475.0,"currency_code":"USD","in_stock":true},{"title":"Passenger","offer_id":67489622786093,"sku":"600-000-000-407","price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/01_dbba1457-ce91-4ab3-bb80-8fddee731432.webp?v=1788646257"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/collections\/2024SequoiaTRD.jpg?v=1788664024","url":"https:\/\/gearlanders.com\/collections\/toyota-sequoia-2023.oembed","provider":"Gearlanders","version":"1.0","type":"link"}