{"title":"Prinsu","description":"\u003cp\u003ePrinsu makes aluminum roof racks and is based in Idaho Falls, Idaho. Prinsu says its original rack was the first form-fitting, low-profile, modular aluminum roof rack on the overlanding market. The Prinsu Pro builds on it with crossbars Prinsu rates 44% stronger than before, stainless steel hardware and bolt-on mounting feet. Here you will find Prinsu Pro roof and cab racks for the Toyota Tacoma, 4Runner, Sequoia and Tundra, the Nissan Frontier, the Ford Bronco 2-door hardtop, the Lexus GX 550 and the Rivian R1S and R1T, plus a ladder and an accessory panel for the Sequoia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop by type:\u003c\/strong\u003e \u003ca href=\"\/collections\/prinsu-designs?filter.p.product_type=Roof+Rack\"\u003eRoof racks\u003c\/a\u003e, \u003ca href=\"\/collections\/prinsu-designs?filter.p.product_type=Roof+Rack+Accessory\"\u003eLadders and accessory panels\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop by vehicle:\u003c\/strong\u003e \u003ca href=\"\/collections\/tacoma-adventure-upgrades\"\u003e3rd Gen Tacoma\u003c\/a\u003e, \u003ca href=\"\/collections\/4th-gen-tacoma\"\u003e4th Gen Tacoma\u003c\/a\u003e, \u003ca href=\"\/collections\/4runner\"\u003e5th Gen 4Runner\u003c\/a\u003e, \u003ca href=\"\/collections\/6th-gen-4runner\"\u003e6th Gen 4Runner\u003c\/a\u003e, \u003ca href=\"\/collections\/toyota-sequoia-2023\"\u003eSequoia (2023+)\u003c\/a\u003e, \u003ca href=\"\/collections\/tundra\"\u003e3rd Gen Tundra\u003c\/a\u003e, \u003ca href=\"\/collections\/nissan-frontier\"\u003eNissan Frontier\u003c\/a\u003e, \u003ca href=\"\/collections\/ford-bronco-accessories\"\u003eFord Bronco\u003c\/a\u003e, \u003ca href=\"\/collections\/lexus-gx-550\"\u003eLexus GX 550\u003c\/a\u003e, \u003ca href=\"\/collections\/rivian\"\u003eRivian\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdd front armor:\u003c\/strong\u003e \u003ca href=\"\/collections\/cbi-offroad\"\u003eCBI Offroad bumpers and sliders\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Ships by truck freight. Freight is calculated and shown at checkout. Prinsu Pro racks are built to order, and the product page shows current timing.\u003c\/p\u003e\u003cdetails\u003e\u003csummary\u003eDo I have to drill my roof?\u003c\/summary\u003e\u003cp\u003eIt depends on the vehicle. The 4Runner racks, for example, bolt to factory mounting points with no drilling. Each rack page explains how it mounts.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow much weight can a Prinsu Pro rack carry?\u003c\/summary\u003e\u003cp\u003eRatings vary by vehicle. Prinsu rates the Pro rack for the 2025+ 4Runner at 700 lb dynamic (moving) and 1,200 lb static (parked). Check the product page for your rack.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs there a warranty?\u003c\/summary\u003e\u003cp\u003ePrinsu backs its Pro roof racks with a limited lifetime warranty against manufacturing defects.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes free shipping apply?\u003c\/summary\u003e\u003cp\u003eNo. Ships by truck freight. Freight is calculated and shown at checkout. Free shipping offers do not apply to these racks.\u003c\/p\u003e\u003c\/details\u003e","products":[{"product_id":"prinsu-pro-toyota-tacoma-cab-rack-2024","title":"Prinsu Pro Toyota Tacoma Cab Roof Rack 2024+","description":"\u003cp\u003eThe Prinsu Pro Toyota Tacoma Cab Rack is a low-profile aluminum roof rack built for the 4th Gen Tacoma. It gives you a strong, modular platform for a rooftop tent, awning, light bar, recovery boards, and other trail gear.\u003c\/p\u003e\n\u003cp\u003ePrinsu redesigned the Pro crossbar to be 44% stronger than earlier versions and added six drop-in points to every bar, so mounting accessories is quick. Installation is no-drill. Choose your wind deflector style when you order: Standard, or Cutout for 40 inch light bars.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned Prinsu Pro crossbars, 44% stronger than earlier Prinsu crossbars\u003c\/li\u003e\n\u003cli\u003e6 integrated drop-in points per crossbar for quick gear and accessory mounting\u003c\/li\u003e\n\u003cli\u003eTwo-part side rail design with a bend on top of the Pro side rail for added rigidity\u003c\/li\u003e\n\u003cli\u003eRecessed bolt-on mounting feet\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant stainless steel hardware\u003c\/li\u003e\n\u003cli\u003ePowder-coated aluminum construction\u003c\/li\u003e\n\u003cli\u003eNo-drill installation\u003c\/li\u003e\n\u003cli\u003eTop integrated flange\u003c\/li\u003e\n\u003cli\u003eWind deflector options: Standard or Cutout for 40 inch light bars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication \/ Vehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2024 and newer Toyota Tacoma (4th Gen) cab roof\u003c\/li\u003e\n\u003cli\u003eNot for 2005-2023 Tacoma, which uses a separate Prinsu Pro cab rack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: about 50 lb\u003c\/li\u003e\n\u003cli\u003eCrossbars: 7 crossbars, 47 inch\u003c\/li\u003e\n\u003cli\u003eHeight added to top of vehicle: about 3.5 inch\u003c\/li\u003e\n\u003cli\u003eLoad rating: 700 lb dynamic, 1200 lb static. Prinsu notes capacity varies with the number of crossbars and how they are configured, and is limited by your vehicle's own roof capacity.\u003c\/li\u003e\n\u003cli\u003eWarranty: Prinsu limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShips by truck freight. Freight is calculated and shown at checkout.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply to this item.\u003c\/li\u003e\n\u003cli\u003eBuilt to order. Prinsu Pro racks usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused items in original packaging with an RMA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich wind deflector should I choose?\u003c\/strong\u003e Choose Standard for a solid front face. Choose the light bar cutout if you plan to run a 40 inch light bar through the deflector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need to drill my roof?\u003c\/strong\u003e No. Prinsu lists this rack as a no-drill install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes it fit my 2023 Tacoma?\u003c\/strong\u003e No. This rack is for 2024 and newer. The 2005-2023 Tacoma uses a different Prinsu Pro cab rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it shipped?\u003c\/strong\u003e It ships by truck freight. Freight is calculated and shown at checkout, and free shipping does not apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e Prinsu Pro racks are built to order and usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prinsu","offers":[{"title":"Standard","offer_id":67486623105069,"sku":"400-002-010-007","price":1140.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars","offer_id":67486973394989,"sku":"400-002-010-008","price":1140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/400-002-010-007_02_orig.jpg?v=1789356052"},{"product_id":"prinsu-pro-toyota-tacoma-cab-rack-2005-2023","title":"Prinsu Pro Toyota Tacoma Cab Roof Rack 2005-2023","description":"\u003cp\u003eThe Prinsu Pro Toyota Tacoma Cab Rack is a low-profile aluminum roof rack for the 2005-2023 Tacoma. It turns the cab roof into a strong, modular platform for a rooftop tent, awning, light bar, and trail gear.\u003c\/p\u003e\n\u003cp\u003eThe Pro crossbar is 44% stronger than earlier Prinsu bars and has six drop-in points per bar for quick mounting. Installation is no-drill. Choose your wind deflector style when you order: Standard, or Cutout for 40 inch light bars.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned Prinsu Pro crossbars, 44% stronger than earlier Prinsu crossbars\u003c\/li\u003e\n\u003cli\u003e6 integrated drop-in points per crossbar for quick gear and accessory mounting\u003c\/li\u003e\n\u003cli\u003eTwo-part side rail design with a bend on top of the Pro side rail for added rigidity\u003c\/li\u003e\n\u003cli\u003eRecessed bolt-on mounting feet\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant stainless steel hardware\u003c\/li\u003e\n\u003cli\u003ePowder-coated aluminum construction\u003c\/li\u003e\n\u003cli\u003eNo-drill installation\u003c\/li\u003e\n\u003cli\u003eWind deflector options: Standard or Cutout for 40 inch light bars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication \/ Vehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2005-2023 Toyota Tacoma (2nd and 3rd Gen) cab roof\u003c\/li\u003e\n\u003cli\u003eNot for 2024 and newer Tacoma, which uses a separate Prinsu Pro cab rack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: about 50 lb\u003c\/li\u003e\n\u003cli\u003eCrossbars: 7 crossbars, 47 inch\u003c\/li\u003e\n\u003cli\u003eHeight added to top of vehicle: about 3.5 inch\u003c\/li\u003e\n\u003cli\u003eLoad rating: 700 lb dynamic, 1200 lb static. Prinsu notes capacity varies with the number of crossbars and how they are configured, and is limited by your vehicle's own roof capacity.\u003c\/li\u003e\n\u003cli\u003eWarranty: Prinsu limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShips by truck freight. Freight is calculated and shown at checkout.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply to this item.\u003c\/li\u003e\n\u003cli\u003eBuilt to order. Prinsu Pro racks usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused items in original packaging with an RMA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich wind deflector should I choose?\u003c\/strong\u003e Choose Standard for a solid front face. Choose the light bar cutout if you plan to run a 40 inch light bar through the deflector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need to drill my roof?\u003c\/strong\u003e No. Prinsu lists this rack as a no-drill install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes it fit my 2024 Tacoma?\u003c\/strong\u003e No. This rack is for 2005-2023. The 2024 and newer Tacoma uses a different Prinsu Pro cab rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it shipped?\u003c\/strong\u003e It ships by truck freight. Freight is calculated and shown at checkout, and free shipping does not apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e Prinsu Pro racks are built to order and usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prinsu","offers":[{"title":"Standard","offer_id":67486623236141,"sku":"400-002-010-001","price":1080.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars","offer_id":67486973624365,"sku":"400-002-010-002","price":1080.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/400-002-010-001_02_orig.jpg?v=1789356036"},{"product_id":"prinsu-pro-toyota-4runner-full-roof-rack-2010-2024","title":"Prinsu Pro Toyota 4Runner Full Roof Rack 2010-2024","description":"\u003cp\u003eThe Prinsu Pro Toyota 4Runner Full Roof Rack is a modular aluminum roof rack for the 2010-2024 Toyota 4Runner. It runs the full length of the roof and gives you a strong platform for rooftop tents, cargo boxes, awnings, and off-road gear.\u003c\/p\u003e\n\u003cp\u003ePrinsu redesigned the Pro crossbar to be 44% stronger than earlier versions and added six drop-in points per bar. The rack is a no-drill, bolt-on install that uses the factory mounting points. Choose your wind deflector at checkout: Standard, or Cutout for 40 inch light bars.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned Prinsu Pro crossbars, 44% stronger than earlier Prinsu crossbars\u003c\/li\u003e\n\u003cli\u003e6 integrated drop-in points per crossbar for quick gear and accessory mounting\u003c\/li\u003e\n\u003cli\u003eTwo-part side rail design with a bend on top of the Pro side rail for added rigidity\u003c\/li\u003e\n\u003cli\u003eRecessed bolt-on mounting feet\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant stainless steel hardware\u003c\/li\u003e\n\u003cli\u003ePowder-coated aluminum construction\u003c\/li\u003e\n\u003cli\u003eNo-drill, bolt-on installation using factory mounting points\u003c\/li\u003e\n\u003cli\u003eWind deflector options: Standard or Cutout for 40 inch light bars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication \/ Vehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2010-2024 Toyota 4Runner (5th Gen), including SR5, TRD Off-Road, TRD Pro, and Limited trims\u003c\/li\u003e\n\u003cli\u003eNot for the 2025-2026 4Runner, which uses a different Prinsu Pro rack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: about 70 lb\u003c\/li\u003e\n\u003cli\u003eCrossbars: 10 crossbars, 47 inch\u003c\/li\u003e\n\u003cli\u003eHeight added to top of vehicle: about 3.5 inch\u003c\/li\u003e\n\u003cli\u003eLoad rating: 700 lb dynamic (while driving), 1200 lb static (parked). Prinsu notes capacity varies with the number of crossbars and how they are configured, and is limited by your vehicle's own roof capacity.\u003c\/li\u003e\n\u003cli\u003eSunroof: Prinsu says the rack allows full use of the factory sunroof, depending on your accessory setup\u003c\/li\u003e\n\u003cli\u003eWarranty: Prinsu limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShips by truck freight. Freight is calculated and shown at checkout.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply to this item.\u003c\/li\u003e\n\u003cli\u003eBuilt to order. Prinsu Pro racks usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused items in original packaging with an RMA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich wind deflector should I choose?\u003c\/strong\u003e Choose Standard for a solid front face. Choose the light bar cutout if you plan to run a 40 inch light bar through the deflector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I still use my sunroof?\u003c\/strong\u003e Yes. Prinsu says the rack design allows full use of the factory sunroof, depending on how you set up your accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the load rating?\u003c\/strong\u003e Prinsu rates it at 700 lb dynamic and 1200 lb static. Capacity varies with crossbar count and layout, and your vehicle's roof rating still applies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes it fit my 2025 4Runner?\u003c\/strong\u003e No. This rack is for 2010-2024. The 2025-2026 4Runner uses a different Prinsu Pro rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it shipped?\u003c\/strong\u003e It ships by truck freight. Freight is calculated and shown at checkout, and free shipping does not apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e Prinsu Pro racks are built to order and usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prinsu","offers":[{"title":"Standard","offer_id":67486623399981,"sku":"400-002-011-001","price":1380.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars","offer_id":67486973689901,"sku":"400-002-011-002","price":1380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/400-002-011-001_02_orig.jpg?v=1789356009"},{"product_id":"prinsu-pro-toyota-4runner-roof-rack-2025-2026","title":"Prinsu Pro Toyota 4Runner Roof Rack 2025-2026","description":"\u003cp\u003eThe Prinsu Pro Roof Rack for the 2025 and newer Toyota 4Runner builds on a decade of Prinsu racks with a stronger crossbar and a fully bolt-on install. It gives the 6th Gen 4Runner a rugged platform for rooftop tents, awnings, light bars, recovery gear, and more.\u003c\/p\u003e\n\u003cp\u003eEach crossbar is 44% stronger than previous generations and carries six drop-in points. Installation is no-drill and fully bolt-on. Choose your wind deflector style when you order: Standard, or Light Bar Cutout.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned Prinsu Pro crossbars, 44% stronger than earlier Prinsu crossbars\u003c\/li\u003e\n\u003cli\u003e6 integrated drop-in points per crossbar for quick gear and accessory mounting\u003c\/li\u003e\n\u003cli\u003eTwo-part side rail design with a bend on top of the Pro side rail for added rigidity\u003c\/li\u003e\n\u003cli\u003eRecessed bolt-on mounting feet\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant stainless steel hardware\u003c\/li\u003e\n\u003cli\u003ePowder-coated aluminum construction\u003c\/li\u003e\n\u003cli\u003eNo-drill, fully bolt-on installation\u003c\/li\u003e\n\u003cli\u003eLoad capacity: 700 lb dynamic, 1200 lb static\u003c\/li\u003e\n\u003cli\u003eWind deflector options: Standard or Light Bar Cutout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication \/ Vehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2025-2026 Toyota 4Runner (6th Gen)\u003c\/li\u003e\n\u003cli\u003eNot for 2010-2024 4Runner, which uses the Prinsu Pro full roof rack for that generation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoad rating: 700 lb dynamic, 1200 lb static\u003c\/li\u003e\n\u003cli\u003eMaterial: powder-coated aluminum with stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eWarranty: Prinsu lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShips by truck freight. Freight is calculated and shown at checkout.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply to this item.\u003c\/li\u003e\n\u003cli\u003eBuilt to order. Prinsu Pro racks usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused items in original packaging with an RMA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich wind deflector should I choose?\u003c\/strong\u003e Choose Standard for a solid front face. Choose the light bar cutout if you plan to run a 40 inch light bar through the deflector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need to drill my roof?\u003c\/strong\u003e No. Prinsu lists a no-drill, fully bolt-on install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes it fit my 2024 4Runner?\u003c\/strong\u003e No. This rack is for 2025-2026. The 2010-2024 4Runner uses a different Prinsu Pro rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it shipped?\u003c\/strong\u003e It ships by truck freight. Freight is calculated and shown at checkout, and free shipping does not apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e Prinsu Pro racks are built to order and usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prinsu","offers":[{"title":"Standard","offer_id":67486623432749,"sku":"400-002-011-006","price":1380.0,"currency_code":"USD","in_stock":true},{"title":"Light Bar Cutout","offer_id":67486973722669,"sku":"400-002-011-007","price":1380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/400-002-011-006_03_orig.jpg?v=1789356016"},{"product_id":"prinsu-pro-rivian-r1t-roof-rack","title":"Prinsu Pro Rivian R1T Roof Rack","description":"\u003cp\u003eThe Prinsu Pro Roof Rack for the Rivian R1T is an all-aluminum, low-profile rack from the Prinsu Pro EV Series. It bolts to the factory Rivian mounting points and gives your truck a strong platform for tents, cargo, and trail gear.\u003c\/p\u003e\n\u003cp\u003eThe extruded Pro crossbar is 44% stronger than earlier Prinsu bars, with six integrated drop points per bar for mounting to the T-slots. No drilling or modification is required. Choose your wind deflector style when you order: Standard, or Light Bar Cutout for an integrated 40 inch light bar.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll-aluminum construction for light weight\u003c\/li\u003e\n\u003cli\u003ePrinsu Pro extruded crossbar, 44% stronger than earlier Prinsu crossbars\u003c\/li\u003e\n\u003cli\u003e6 integrated drop points per crossbar for easy mounting to the T-slots\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation using factory Rivian mounting points\u003c\/li\u003e\n\u003cli\u003eNo drilling or modification required\u003c\/li\u003e\n\u003cli\u003eStainless steel and corrosion-resistant black mounting hardware\u003c\/li\u003e\n\u003cli\u003eTwo-part side rail design with a top bend on the Pro side rail for added strength\u003c\/li\u003e\n\u003cli\u003eRecessed bolt-on mounting feet\u003c\/li\u003e\n\u003cli\u003eIntegrated 40 inch light bar mounting with optional light bar cutout wind deflector\u003c\/li\u003e\n\u003cli\u003eSatin black textured powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication \/ Vehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits Rivian R1T\u003c\/li\u003e\n\u003cli\u003eMounts to the factory Rivian mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoad capacity: 600 lb dynamic, 1000 lb static\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminum, satin black textured powder coat\u003c\/li\u003e\n\u003cli\u003eWarranty: Prinsu lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShips by truck freight. Freight is calculated and shown at checkout.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply to this item.\u003c\/li\u003e\n\u003cli\u003eBuilt to order. Prinsu Pro racks usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused items in original packaging with an RMA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich wind deflector should I choose?\u003c\/strong\u003e Choose Standard for a solid front face. Choose the light bar cutout if you plan to run a 40 inch light bar through the deflector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need to drill?\u003c\/strong\u003e No. It bolts to the factory Rivian mounting points with no drilling or modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it shipped?\u003c\/strong\u003e It ships by truck freight. Freight is calculated and shown at checkout, and free shipping does not apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e Prinsu Pro racks are built to order and usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prinsu","offers":[{"title":"Standard","offer_id":67486623498285,"sku":"400-002-033-003","price":1280.0,"currency_code":"USD","in_stock":true},{"title":"Light Bar Cutout","offer_id":67486973755437,"sku":"400-002-033-004","price":1280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/400-002-033-003_03.webp?v=1788537410"},{"product_id":"prinsu-pro-rivian-r1s-roof-rack","title":"Prinsu Pro Rivian R1S Roof Rack","description":"\u003cp\u003eThe Prinsu Pro Roof Rack for the Rivian R1S is an all-aluminum, low-profile rack from the Prinsu Pro EV Series. It bolts to the factory Rivian mounting points and gives your SUV a strong platform for tents, cargo, and trail gear.\u003c\/p\u003e\n\u003cp\u003eThe extruded Pro crossbar is 44% stronger than earlier Prinsu bars, with six integrated drop points per bar for mounting to the T-slots. No drilling or modification is required. Choose your wind deflector style when you order: Standard, or Light Bar Cutout for an integrated 40 inch light bar.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll-aluminum construction for light weight\u003c\/li\u003e\n\u003cli\u003ePrinsu Pro extruded crossbar, 44% stronger than earlier Prinsu crossbars\u003c\/li\u003e\n\u003cli\u003e6 integrated drop points per crossbar for easy mounting to the T-slots\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation using factory Rivian mounting points\u003c\/li\u003e\n\u003cli\u003eNo drilling or modification required\u003c\/li\u003e\n\u003cli\u003eStainless steel and corrosion-resistant black mounting hardware\u003c\/li\u003e\n\u003cli\u003eTwo-part side rail design with a top bend on the Pro side rail for added strength\u003c\/li\u003e\n\u003cli\u003eRecessed bolt-on mounting feet\u003c\/li\u003e\n\u003cli\u003eIntegrated 40 inch light bar mounting with optional light bar cutout wind deflector\u003c\/li\u003e\n\u003cli\u003eSatin black textured powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication \/ Vehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits Rivian R1S\u003c\/li\u003e\n\u003cli\u003eMounts to the factory Rivian mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoad capacity: 800 lb dynamic, 1200 lb static\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminum, satin black textured powder coat\u003c\/li\u003e\n\u003cli\u003eWarranty: Prinsu lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShips by truck freight. Freight is calculated and shown at checkout.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply to this item.\u003c\/li\u003e\n\u003cli\u003eBuilt to order. Prinsu Pro racks usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused items in original packaging with an RMA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich wind deflector should I choose?\u003c\/strong\u003e Choose Standard for a solid front face. Choose the light bar cutout if you plan to run a 40 inch light bar through the deflector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need to drill?\u003c\/strong\u003e No. It bolts to the factory Rivian mounting points with no drilling or modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it shipped?\u003c\/strong\u003e It ships by truck freight. Freight is calculated and shown at checkout, and free shipping does not apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e Prinsu Pro racks are built to order and usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prinsu","offers":[{"title":"Standard","offer_id":67486623531053,"sku":"400-002-033-001","price":1720.0,"currency_code":"USD","in_stock":true},{"title":"Light Bar Cutout","offer_id":67486973788205,"sku":"400-002-033-002","price":1720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/400-002-033-001_01_orig.jpg?v=1789355985"},{"product_id":"prinsu-pro-ford-bronco-2-door-hardtop-roof-rack-2021-current","title":"Prinsu Pro Ford Bronco 2-Door Hardtop Roof Rack 2021-Current","description":"\u003cp\u003eThe Prinsu Pro roof rack turns the roof of a 2021-Current Ford Bronco 2-door hardtop into a flat, modular aluminum platform for a rooftop tent, recovery boards, cases, and trail gear. It bolts to the factory mounting points, so there is no drilling.\u003c\/p\u003e\n\u003cp\u003ePrinsu redesigned the Pro crossbar to be 44% stronger than earlier versions and added six integrated drop-in points per bar, so strapping and mounting gear is quick. A bend on top of the Pro side rail adds rigidity and more places to mount accessories, and the powder-coated black aluminum build keeps weight down.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNo drilling required; uses the factory mounting points\u003c\/li\u003e\n\u003cli\u003eAll new Pro crossbar, 44% stronger\u003c\/li\u003e\n\u003cli\u003e6 integrated drop-in points per crossbar\u003c\/li\u003e\n\u003cli\u003eBend on top of the Pro side rail\u003c\/li\u003e\n\u003cli\u003eAll aluminum construction, powder coated black\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware kit\u003c\/li\u003e\n\u003cli\u003eLarge, fully modular platform area\u003c\/li\u003e\n\u003cli\u003eWind deflector choice: Standard or Light Bar Cutout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoad rating: 700 lb dynamic, 1,200 lb static (see note below)\u003c\/li\u003e\n\u003cli\u003eWeight: 59 lb\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminum, powder coated black\u003c\/li\u003e\n\u003cli\u003eHardware: stainless steel\u003c\/li\u003e\n\u003cli\u003eInstall: no drill, factory mounting points\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime, from Prinsu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing a wind deflector\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e has a solid front face for a clean look and less wind noise. \u003cstrong\u003eLight Bar Cutout\u003c\/strong\u003e is the same rack with an opening in the deflector so you can run a light bar through the front. Light bar sold separately.\u003c\/p\u003e\n\u003ch3\u003eApplication \/ fitment\u003c\/h3\u003e\n\u003cp\u003eFits the 2021-Current Ford Bronco 2-door with the hardtop. This rack is made for the 2-door hardtop only. It does not fit the 4-door Bronco or soft top models.\u003c\/p\u003e\n\u003cp\u003ePrinsu notes that rack capacity varies with the number of crossbars used and how they are arranged, and that the rack is limited by the weight capacity of your vehicle. Check your owner's manual for the roof load rating and add up the rack, your gear, and any rooftop tent before you load up.\u003c\/p\u003e\n\u003cp\u003eShipping: this item ships by freight. The shipping cost is calculated at checkout.\u003c\/p\u003e\n\u003cp\u003eMade to order, ships in about 5 weeks.\u003c\/p\u003e\n\u003cp\u003ePlanning to sleep up top? Browse the \u003ca href=\"\/collections\/rooftop-tents\"\u003erooftop tents\u003c\/a\u003e collection, or compare more options in \u003ca href=\"\/collections\/off-road-roof-racks\"\u003ebed racks and roof racks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Prinsu","offers":[{"title":"Standard","offer_id":67489579728941,"sku":"400-002-017-006","price":1380.0,"currency_code":"USD","in_stock":true},{"title":"Light Bar Cutout","offer_id":67489579761709,"sku":"400-002-017-007","price":1380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/04_ba9b89c7-5682-455b-9286-eac67c389ec9.webp?v=1790177967"},{"product_id":"prinsu-pro-lexus-gx550-roof-rack","title":"Prinsu Pro Lexus GX550 Roof Rack","description":"\u003cp\u003eThe Prinsu Pro roof rack gives the Lexus GX550 a full-length, low-profile aluminum platform for a rooftop tent, cases, recovery gear, and whatever else the trip calls for. It installs with no drilling and bolts on with recessed mounting feet that keep the look clean.\u003c\/p\u003e\n\u003cp\u003eThe Pro crossbar is 44% stronger than earlier Prinsu bars and has six integrated drop-in points per bar. A two-part side rail with a bend on top adds rigidity, and corrosion-resistant stainless steel hardware holds it all together.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll new Pro crossbar, 44% stronger\u003c\/li\u003e\n\u003cli\u003e6 integrated drop-in points per crossbar\u003c\/li\u003e\n\u003cli\u003eNo drill installation\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eTwo-part side rail design increases rigidity\u003c\/li\u003e\n\u003cli\u003eBend on top of the Pro side rail\u003c\/li\u003e\n\u003cli\u003eRecessed bolt-on mounting feet\u003c\/li\u003e\n\u003cli\u003eWind deflector choice: Standard or Cutout for 40\" Lightbars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoad rating: 700 lb dynamic, 1,200 lb static (see note below)\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminum, powder coated\u003c\/li\u003e\n\u003cli\u003eHardware: corrosion-resistant stainless steel\u003c\/li\u003e\n\u003cli\u003eInstall: no drill\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime, from Prinsu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing a wind deflector\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e has a solid front face. \u003cstrong\u003eCutout for 40\" Lightbars\u003c\/strong\u003e is the same rack with an opening sized for a 40 inch light bar. Light bar sold separately.\u003c\/p\u003e\n\u003ch3\u003eApplication \/ fitment\u003c\/h3\u003e\n\u003cp\u003eFits the Lexus GX550. Prinsu lists this rack for the GX550 only; the GX460 and GX470 use different Prinsu racks.\u003c\/p\u003e\n\u003cp\u003ePrinsu notes that rack capacity varies with the number of crossbars used and how they are arranged, and that the rack is limited by the weight capacity of your vehicle. Check your owner's manual for the roof load rating and add up the rack, your gear, and any rooftop tent before you load up.\u003c\/p\u003e\n\u003cp\u003eShipping: this item ships by freight. The shipping cost is calculated at checkout.\u003c\/p\u003e\n\u003cp\u003eMade to order, ships in about 5 weeks.\u003c\/p\u003e\n\u003cp\u003ePlanning to sleep up top? Browse the \u003ca href=\"\/collections\/rooftop-tents\"\u003erooftop tents\u003c\/a\u003e collection, or compare more options in \u003ca href=\"\/collections\/off-road-roof-racks\"\u003ebed racks and roof racks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Prinsu","offers":[{"title":"Standard","offer_id":67489579794477,"sku":"400-002-016-003","price":1480.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars","offer_id":67489579827245,"sku":"400-002-016-004","price":1480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/02_d35c5e32-d2b5-4f57-9f52-1eedef2a376a.webp?v=1790177926"},{"product_id":"prinsu-pro-toyota-sequoia-roof-rack-2023-2026","title":"Prinsu Pro Toyota Sequoia Roof Rack 2023-2026","description":"\u003cp\u003eThe Prinsu Pro roof rack for the third generation Toyota Sequoia is built to get the most cargo space out of a big family SUV. It installs with no drilling, works with the panoramic sunroof, and gives you a full-length aluminum platform for a rooftop tent, cargo cases, recovery gear, and road trip overflow.\u003c\/p\u003e\n\u003cp\u003eThe Pro crossbar is 44% stronger than earlier Prinsu bars and has six integrated drop-in points per bar. A two-part side rail with a bend on top adds rigidity, recessed bolt-on mounting feet keep the lines clean, and the corrosion-resistant stainless steel hardware is made to hold up to weather and trail miles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll new Pro crossbar, 44% stronger\u003c\/li\u003e\n\u003cli\u003eCompatible with the panoramic sunroof\u003c\/li\u003e\n\u003cli\u003e6 integrated drop-in points per crossbar\u003c\/li\u003e\n\u003cli\u003eNo drill installation\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eTwo-part side rail design increases rigidity\u003c\/li\u003e\n\u003cli\u003eBend on top of the Pro side rail\u003c\/li\u003e\n\u003cli\u003eRecessed bolt-on mounting feet\u003c\/li\u003e\n\u003cli\u003eWind deflector choice: Standard or Light Bar Cutout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoad rating: 700 lb dynamic, 1,200 lb static (see note below)\u003c\/li\u003e\n\u003cli\u003eWeight: 87.7 lb\u003c\/li\u003e\n\u003cli\u003eHardware: corrosion-resistant stainless steel\u003c\/li\u003e\n\u003cli\u003eInstall: no drill\u003c\/li\u003e\n\u003cli\u003eSunroof: compatible with the panoramic sunroof\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime, from Prinsu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing a wind deflector\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e has a solid front face. \u003cstrong\u003eLight Bar Cutout\u003c\/strong\u003e is the same rack with an opening for a 40 inch light bar. Light bar sold separately.\u003c\/p\u003e\n\u003ch3\u003eApplication \/ fitment\u003c\/h3\u003e\n\u003cp\u003eFits the third generation Toyota Sequoia. Earlier Sequoia generations use a different Prinsu rack. Want easier roof access? Add the \u003ca href=\"\/products\/prinsu-toyota-sequoia-ladder-2022-current\"\u003ePrinsu Sequoia ladder\u003c\/a\u003e, or mount gear on the side windows with the \u003ca href=\"\/products\/prinsu-toyota-sequoia-pro-accessory-panel-2022-current\"\u003ePrinsu PRO accessory panel\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePrinsu notes that rack capacity varies with the number of crossbars used and how they are arranged, and that the rack is limited by the weight capacity of your vehicle. Check your owner's manual for the roof load rating and add up the rack, your gear, and any rooftop tent before you load up.\u003c\/p\u003e\n\u003cp\u003eShipping: this item ships by freight. The shipping cost is calculated at checkout.\u003c\/p\u003e\n\u003cp\u003eMade to order, ships in about 5 weeks.\u003c\/p\u003e\n\u003cp\u003ePlanning to sleep up top? Browse the \u003ca href=\"\/collections\/rooftop-tents\"\u003erooftop tents\u003c\/a\u003e collection, or compare more options in \u003ca href=\"\/collections\/off-road-roof-racks\"\u003ebed racks and roof racks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Prinsu","offers":[{"title":"Standard","offer_id":67489605550125,"sku":"400-002-030-003","price":1720.0,"currency_code":"USD","in_stock":true},{"title":"Light Bar Cutout","offer_id":67489605582893,"sku":"400-002-030-004","price":1720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/01_72babdeb-49f6-4fda-82b0-5a7c37765838.webp?v=1790178302"},{"product_id":"prinsu-toyota-sequoia-ladder-2022-current","title":"Prinsu Toyota Sequoia Ladder 2022-Current","description":"\u003cp\u003eThe Prinsu ladder for the third generation Toyota Sequoia gives you solid, secure footing up the back of the rig to reach a roof rack, rooftop tent, cargo box, or recovery gear. It weighs just 17 lb and is rated to 260 lb, so you can climb with gear in hand.\u003c\/p\u003e\n\u003cp\u003eIt is built from 14-gauge formed steel rungs and 1 x 1 inch square tubing (0.083 inch wall), finished in a 2-stage black powder coat over an epoxy zinc primer. The slim, vehicle-specific design will not block your backup camera or rearview mirror, it works with manual and power lift gates, and it is compatible with CBI swing arm tire carriers. Prinsu makes it in Idaho Falls, Idaho.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific fit for the third generation Toyota Sequoia, all trims\u003c\/li\u003e\n\u003cli\u003eJust 17 lb with a 260 lb load capacity\u003c\/li\u003e\n\u003cli\u003e14-gauge formed steel rungs with a durable surface for confident footing\u003c\/li\u003e\n\u003cli\u003eModular design with adjustable rung placement\u003c\/li\u003e\n\u003cli\u003e2-stage black powder coat with epoxy zinc primer\u003c\/li\u003e\n\u003cli\u003eDoes not block the backup camera or rearview mirror\u003c\/li\u003e\n\u003cli\u003eWorks with manual and power lift gates\u003c\/li\u003e\n\u003cli\u003eCompatible with CBI swing arm tire carriers\u003c\/li\u003e\n\u003cli\u003eMade in Idaho Falls, Idaho, USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 17 lb\u003c\/li\u003e\n\u003cli\u003eLoad capacity: 260 lb\u003c\/li\u003e\n\u003cli\u003eRungs: 14-gauge formed steel\u003c\/li\u003e\n\u003cli\u003eSide rails: 1 x 1 inch square tubing, 0.083 inch wall\u003c\/li\u003e\n\u003cli\u003eFinish: 2-stage black powder coat with epoxy zinc primer\u003c\/li\u003e\n\u003cli\u003eInstall: drill two small holes on the underside of the hatch jamb; plus nuts and hardware included\u003c\/li\u003e\n\u003cli\u003eInstall time: about 1 hour with common tools; video and PDF guides from Prinsu\u003c\/li\u003e\n\u003cli\u003eWarranty: Limited lifetime, from Prinsu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication \/ fitment\u003c\/h3\u003e\n\u003cp\u003eFits the third generation Toyota Sequoia, all trims including SR5, Limited, Platinum, TRD Pro, Capstone, and hybrid models.\u003c\/p\u003e\n\u003cp\u003eBefore you install: this ladder needs two small holes drilled on the underside of the hatch jamb, reinforced with the included plus nuts. The ladder mounts over the flip-up rear glass, so that glass cannot be opened with the ladder installed. The main hatch and lift gate keep working normally.\u003c\/p\u003e\n\u003cp\u003ePair it with the \u003ca href=\"\/products\/prinsu-pro-toyota-sequoia-roof-rack-2023-2026\"\u003ePrinsu Pro roof rack for the Sequoia\u003c\/a\u003e for a full roof setup.\u003c\/p\u003e\n\u003cp\u003eShipping: this item ships by freight. The shipping cost is calculated at checkout.\u003c\/p\u003e\n\u003cp\u003eMade to order, ships in about 5 weeks.\u003c\/p\u003e","brand":"Prinsu","offers":[{"title":"Default Title","offer_id":67489622523949,"sku":"600-000-000-324","price":480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/01_6fca30c5-80e5-46d9-a00e-d3aef6abd924.webp?v=1788646227"},{"product_id":"prinsu-toyota-sequoia-pro-accessory-panel-2022-current","title":"Prinsu Toyota Sequoia PRO Accessory Panel 2022-Current","description":"\u003cp\u003eThe Prinsu PRO accessory panel turns the rear side window area of your Sequoia into mounting space for the gear that does not fit on the roof. It mounts to the Prinsu PRO roof rack and rests against the window on two suction cups.\u003c\/p\u003e\n\u003cp\u003eThe all-aluminum panel is powder coated black and uses a two-piece design, so swapping accessories is easy. Mount Power Tanks, Rotopax, DMOS shovel mounts, Mini Maxtrax, Quick Fists, and more. Choose the driver or passenger side.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMounts to the Prinsu PRO roof rack\u003c\/li\u003e\n\u003cli\u003eAvailable for the driver or passenger side window\u003c\/li\u003e\n\u003cli\u003eRests on the window with two suction cups\u003c\/li\u003e\n\u003cli\u003eAll aluminum construction, powder coated black\u003c\/li\u003e\n\u003cli\u003eTwo-piece design for easily switching out accessories\u003c\/li\u003e\n\u003cli\u003eMany mounting options: Power Tanks, Rotopax, DMOS shovel mounts, Mini Maxtrax, Quick Fists, and more\u003c\/li\u003e\n\u003cli\u003eLightweight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 12 lb\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminum, powder coated black\u003c\/li\u003e\n\u003cli\u003eSide: driver or passenger (choose one; each panel sold separately)\u003c\/li\u003e\n\u003cli\u003eMounting: Prinsu PRO roof rack plus two window suction cups\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime, from Prinsu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication \/ fitment\u003c\/h3\u003e\n\u003cp\u003eFits the third generation Toyota Sequoia with a Prinsu PRO roof rack installed. It does not mount without the PRO rack. Need the rack? See the \u003ca href=\"\/products\/prinsu-pro-toyota-sequoia-roof-rack-2023-2026\"\u003ePrinsu Pro roof rack for the Sequoia\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eShipping: this item ships by freight. The shipping cost is calculated at checkout.\u003c\/p\u003e\n\u003cp\u003eMade to order, ships in about 5 weeks.\u003c\/p\u003e","brand":"Prinsu","offers":[{"title":"Driver","offer_id":67489622753325,"sku":"600-000-000-408","price":475.0,"currency_code":"USD","in_stock":true},{"title":"Passenger","offer_id":67489622786093,"sku":"600-000-000-407","price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/01_a9b8eab7-7003-49b2-8a4e-0209447ac682.webp?v=1790178294"},{"product_id":"prinsu-pro-nissan-frontier-roof-rack-2022-current","title":"Prinsu Pro Nissan Frontier Roof Rack 2022-Current","description":"\u003cp\u003eThe Prinsu Pro roof rack for the 2022-Current Nissan Frontier adds a strong, low-profile aluminum deck for a rooftop tent, recovery boards, cases, and camp gear. It adds only about 3.5 inches to the height of the truck.\u003c\/p\u003e\n\u003cp\u003eSeven 47 inch Pro crossbars, each 44% stronger than earlier Prinsu bars, carry six integrated drop-in points apiece for quick tie-downs and accessory mounts. A two-part side rail with a bend on top adds rigidity, recessed bolt-on feet keep the profile clean, and corrosion-resistant stainless steel hardware is included.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll new Pro crossbar, 44% stronger\u003c\/li\u003e\n\u003cli\u003e6 integrated drop-in points per crossbar\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eTwo-part side rail design increases rigidity\u003c\/li\u003e\n\u003cli\u003eBend on top of the Pro side rail\u003c\/li\u003e\n\u003cli\u003eRecessed bolt-on mounting feet\u003c\/li\u003e\n\u003cli\u003eWind deflector choice: Standard or Cutout for 40 inch Lightbars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoad rating: 700 lb dynamic, 1,200 lb static (see note below)\u003c\/li\u003e\n\u003cli\u003eWeight: about 50 lb\u003c\/li\u003e\n\u003cli\u003eCrossbars: 7 at 47 inches\u003c\/li\u003e\n\u003cli\u003eHeight added to top of vehicle: about 3.5 inches\u003c\/li\u003e\n\u003cli\u003eHardware: corrosion-resistant stainless steel\u003c\/li\u003e\n\u003cli\u003eWarranty: Limited lifetime, from Prinsu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing a wind deflector\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e has a solid front face. \u003cstrong\u003eCutout for 40 inch Lightbars\u003c\/strong\u003e is the same rack with an opening sized for a 40 inch light bar. Light bar sold separately.\u003c\/p\u003e\n\u003ch3\u003eApplication \/ fitment\u003c\/h3\u003e\n\u003cp\u003eFits the 2022-Current Nissan Frontier. Earlier Frontier generations (2005-2021) use a different Prinsu rack.\u003c\/p\u003e\n\u003cp\u003ePrinsu notes that rack capacity varies with the number of crossbars used and how they are arranged, and that the rack is limited by the weight capacity of your vehicle. Check your owner's manual for the roof load rating and add up the rack, your gear, and any rooftop tent before you load up.\u003c\/p\u003e\n\u003cp\u003eShipping: this item ships by freight. The shipping cost is calculated at checkout.\u003c\/p\u003e\n\u003cp\u003eMade to order, ships in about 5 weeks.\u003c\/p\u003e\n\u003cp\u003ePlanning to sleep up top? Browse the \u003ca href=\"\/collections\/rooftop-tents\"\u003erooftop tents\u003c\/a\u003e collection, or compare more options in \u003ca href=\"\/collections\/off-road-roof-racks\"\u003ebed racks and roof racks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Prinsu","offers":[{"title":"Standard","offer_id":67489800421421,"sku":"400-002-024-001","price":1080.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40 inch Lightbars","offer_id":67489800454189,"sku":"400-002-024-002","price":1080.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/02_8ab81776-8eb2-4b5c-b483-8f5a7cbcec18_orig.jpg?v=1789355977"},{"product_id":"prinsu-pro-toyota-tundra-crewmax-roof-rack-2022-current","title":"Prinsu Pro Toyota Tundra CrewMax Roof Rack 2022-Current","description":"\u003cp\u003eThe Prinsu Pro Toyota Tundra CrewMax Roof Rack is a full-length aluminum roof platform for the 3rd Gen Tundra CrewMax. It carries rooftop tents, awnings, light bars, and recovery gear while keeping a low profile.\u003c\/p\u003e\n\u003cp\u003eThe Pro crossbar is 44% stronger than earlier Prinsu bars and has six drop-in points per bar. Choose your wind deflector style when you order: Standard, or Cutout for 40 inch light bars.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned Prinsu Pro crossbars, 44% stronger than earlier Prinsu crossbars\u003c\/li\u003e\n\u003cli\u003e6 integrated drop-in points per crossbar for quick gear and accessory mounting\u003c\/li\u003e\n\u003cli\u003eTwo-part side rail design with a bend on top of the Pro side rail for added rigidity\u003c\/li\u003e\n\u003cli\u003eRecessed bolt-on mounting feet\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant stainless steel hardware\u003c\/li\u003e\n\u003cli\u003ePowder-coated aluminum construction\u003c\/li\u003e\n\u003cli\u003eWind deflector options: Standard or Cutout for 40 inch light bars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication \/ Vehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2022 and newer Toyota Tundra CrewMax (3rd Gen)\u003c\/li\u003e\n\u003cli\u003eCrewMax cab only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: about 60 lb\u003c\/li\u003e\n\u003cli\u003eCrossbars: 8 crossbars, 51 inch\u003c\/li\u003e\n\u003cli\u003eHeight added to top of vehicle: about 3.5 inch\u003c\/li\u003e\n\u003cli\u003eLoad rating: 700 lb dynamic, 1200 lb static. Prinsu notes capacity varies with the number of crossbars and how they are configured, and is limited by your vehicle's own roof capacity.\u003c\/li\u003e\n\u003cli\u003eWarranty: Prinsu limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShips by truck freight. Freight is calculated and shown at checkout.\u003c\/li\u003e\n\u003cli\u003eFree shipping does not apply to this item.\u003c\/li\u003e\n\u003cli\u003eBuilt to order. Prinsu Pro racks usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003cli\u003e30-day returns on unused items in original packaging with an RMA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich wind deflector should I choose?\u003c\/strong\u003e Choose Standard for a solid front face. Choose the light bar cutout if you plan to run a 40 inch light bar through the deflector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes it fit a Double Cab Tundra?\u003c\/strong\u003e No. This rack is for the CrewMax cab.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it shipped?\u003c\/strong\u003e It ships by truck freight. Freight is calculated and shown at checkout, and free shipping does not apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e Prinsu Pro racks are built to order and usually ship in about 5 weeks. This is an estimate, not a guaranteed date.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prinsu","offers":[{"title":"Standard","offer_id":67491799007277,"sku":"400-002-012-003","price":1260.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars","offer_id":67491799040045,"sku":"400-002-012-004","price":1260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/files\/06_de7f893b-fe05-421d-8da6-e646763e9f2f_orig.jpg?v=1789961838"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/6636\/9581\/collections\/hero_prinsu-designs.webp?v=1791002708","url":"https:\/\/gearlanders.com\/collections\/prinsu-designs.oembed","provider":"Gearlanders","version":"1.0","type":"link"}